2017-09-23, 05:51 PM
Try this live demo... we are at a good way to push the signals in influx db and grafana... but we use different system... its for 400 cells Lipo Management of selfmade powerwalls.
http://arztde.dynvpn.de:61011/dashboard/...pZyU4CNufw
In general the plan is to use a normal industrial modbus and push from there with the phython modbus libary the data to influx and also to signal k.
In general same as in wilhelm sk...
in openplotter itself i did got in problems but with normal raspberian it works... Do not know why... the last time i did an upgrade of openplotter and lost all funktionality in this...
So at the moment i run for this an isolate iso just and will wait until the new version is ready... I think in a Battery Management or solar is not in advanced position in developement of openplotter. But i personall need this at first place. So intermediate i try to go that way and at later point when be there is a need it can be integrate. I personall have problems like you to use the things because i am not advanced user and can do only by step by step. I still do not have any plan of the use of MQTT or node red. Near all is in english and i think this time e-sailing do hard work to improve the documentation for not advanced users. I will look forward during winter and when i have time how to integrate different electronics.
There are a lot of - HOW TO Questions and also answers and i will try to sort this a bit out because i think this helps a lot.
German instruction and help how to use it maybee you can find here:
http://www.forum-raspberrypi.de/Thread-d...-raspberry
http://arztde.dynvpn.de:61011/dashboard/...pZyU4CNufw
In general the plan is to use a normal industrial modbus and push from there with the phython modbus libary the data to influx and also to signal k.
In general same as in wilhelm sk...
in openplotter itself i did got in problems but with normal raspberian it works... Do not know why... the last time i did an upgrade of openplotter and lost all funktionality in this...
So at the moment i run for this an isolate iso just and will wait until the new version is ready... I think in a Battery Management or solar is not in advanced position in developement of openplotter. But i personall need this at first place. So intermediate i try to go that way and at later point when be there is a need it can be integrate. I personall have problems like you to use the things because i am not advanced user and can do only by step by step. I still do not have any plan of the use of MQTT or node red. Near all is in english and i think this time e-sailing do hard work to improve the documentation for not advanced users. I will look forward during winter and when i have time how to integrate different electronics.
There are a lot of - HOW TO Questions and also answers and i will try to sort this a bit out because i think this helps a lot.
German instruction and help how to use it maybee you can find here:
http://www.forum-raspberrypi.de/Thread-d...-raspberry