2017-11-16, 02:19 AM
I did exact how Andreas did describe. And I bought the same. I like this super capacitors stuff in general. It's in parts useful if you run solar as well. For my 30 years old engel fridge what have 24 Volts I use up step converter and I support with super capacitors the start. Most knowledge was from Adam and from Iulian and I did start also with some stupid unpacking videos as you mentioned before. Super caps take what they need and get but raspi keep it. Did not got failure. But it's only for save shutdown. And supercool are wonderful to help starting a diesel engine. Here I did test with a small battery agb type 20 Ah but in general a 30 watt panel and a 6 pack 500 F super caps is enough to guaranty a smooth start. Can also be done with some Lipos. And if all runs dirty with batteries and solar in general you can start by hand with dynamo and a simple handweel...
Anyways with the diy power walls we do at the moment with raspi and influx and grafana a raspberry build. So also the epever will be included. And from China I got for inverters the modus protocol will soon be translate in next week's. And for final I will not care much failures of the raspi because plan b is the discussion of today to use in such case complete android as server. With opencpn I can not something back because of Kap files so I have to focus to pure tiles of openseamap or use navionics.
Just look how it works Julian did just did a postbag video with supercaps. They are to big for the raspi but Andreas did explain what is good to use. Read just the coments and look the postbag videos.
Gesendet von meinem SM-G900F mit Tapatalk
Anyways with the diy power walls we do at the moment with raspi and influx and grafana a raspberry build. So also the epever will be included. And from China I got for inverters the modus protocol will soon be translate in next week's. And for final I will not care much failures of the raspi because plan b is the discussion of today to use in such case complete android as server. With opencpn I can not something back because of Kap files so I have to focus to pure tiles of openseamap or use navionics.
Just look how it works Julian did just did a postbag video with supercaps. They are to big for the raspi but Andreas did explain what is good to use. Read just the coments and look the postbag videos.
Gesendet von meinem SM-G900F mit Tapatalk