This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 5 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Introducing OpenPlotter hats!!!
We were really busy and the rest of hats development was stopped but we will resume the plan ASAP with important modifications over the original idea, we will post when we have something.
Reply
(2020-04-24, 12:08 AM)tjmack Wrote: I'm referring back to the original post, old but were the other Hats mentioned ever developed? The MacArthur Hat and the Slocum Hat? I would be very interested in both. Thanks.

I think this one could be what you are looking for
https://geekworm.com/products/raspberry-...sion-board

check also other ones on geek worm related to raspberry pi. 
There are UPS ones, USB hubs, Sata SSD, and CAN bus. 

And more expensive ones:

[color=rgba(0, 0, 0, 0.8)][color=rgba(0, 0, 0, 0.6)]Strato Pi SPBC12X board (https://www.sferalabs.cc/product/strato-pi-can-board/)[/color][/color]
[color=rgba(0, 0, 0, 0.8)]Strato Pi SPBC12X board:[/color]
  • 9-65Vdc power supply, with surge and reverse polarity protection

  • Controller Area Network (CAN) V2.0B interface, supports speeds up to 1Mb/s, with opto-isolatorand electrostatic discharge protection

  • standard RS-485 interfaces to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection

  • real time clock with replaceable CR1025 back-up battery
[color=rgba(0, 0, 0, 0.8)]($140.00)https://www.mouser.com/ProductDetail/?qs=PqoDHHvF64%252BAaGJtJ2H51A%3D%3D[/color]
[color=rgba(0, 0, 0, 0.8)]or same without CAN-bus, model SPBB30X ($100.00):[/color]
[color=rgba(0, 0, 0, 0.8)]https://www.sferalabs.cc/product/strato-pi-base-board/[/color]

Thanks,
Download BBN Marine OS for raspberry pi 

https://bareboat-necessities.github.io/m...at-os.html

Video of actual installation:

https://www.youtube.com/watch?v=3zMjUs2X3qU


Reply
Mgrouch,
Thank you, that is helpful. I am still learning RPi, it is a slow process for me.
Your Bareboat Project is fantastic!
Reply
(2020-04-24, 05:14 PM)tjmack Wrote: Mgrouch,
Thank you, that is helpful. I am still learning RPi, it is a slow process for me.
Your Bareboat Project is fantastic!

See: https://github.com/Thomas-GeDaD/openplot...de_MCS.pdf  Smile Tongue
Reply


Forum Jump:


Users browsing this thread: 6 Guest(s)