This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nmea 0183 to serial
#1
I am using openplotter version 3 on RPi 4. I have a usb gps dongle and a bidirectional usb/nmea interface from digital yacht. I use the input to get nmea data from my nasa wind instrument and would like to send gps data on the output to my vhf radio. Have read the Signal K manual and can find no output other than the server on port 10110. Is there a way to do this? From documentation I guess not using signal k.
Reply
#2
https://openplotter.readthedocs.io/en/3....exing.html
https://github.com/SignalK/signalk-serve...tting-Data
Reply
#3
(2022-10-05, 05:48 AM)tkurki Wrote: https://openplotter.readthedocs.io/en/3....exing.html
https://github.com/SignalK/signalk-serve...tting-Data

Thank you, the second link was very helpful. I am only inputting nmea0183 data into signalK (gps and wind) and want to output everything over the USB data-out serial link, I assume I just need nmea0183 in the output field for that device and do not require the signalk-to-nmea0183 plugin. A

I appreciate your help.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)