[SOLVED] Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: [SOLVED] Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 (/showthread.php?tid=2633) |
[SOLVED] Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - Sailoog - 2020-06-07 Latest Raspbian kernel upgrade (4.19.118) has changed the I2C management and there is a bug that will prevent your computer from booting. According to Raspberry developers this will be fixed on next kernel versions but they have not given a date. If you have not installed the Moitessier HAT app in your OpenPlotter system ignore this and update the kernel normally. These are our provisional solutions: https://www.rooco.eu/2018/06/13/firmware-and-drivers-for-raspberry-pi-moitessier-hat/ RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - serh11 - 2020-06-17 There is another issue with 118 kernel: all GPS related messages are filtered out by the kernel module, although everything is enabled in the configuration. There is a patch available for this. Or is it only me experiencing this? RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - Sailoog - 2020-06-22 I do not think your problem is related to the kernel, please open a new post and we will see. RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - Sailoog - 2020-06-22 Temporary fix: https://www.rooco.eu/2018/06/13/firmware-and-drivers-for-raspberry-pi-moitessier-hat/ RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - jamieFL - 2020-06-23 (2020-06-22, 04:26 PM)Sailoog Wrote: Temporary fix: https://www.rooco.eu/2018/06/13/firmware-and-drivers-for-raspberry-pi-moitessier-hat/ For clarification. If I follow step 4 in scenerio 2, I can then run an update of Raspberry Pi OS? Specifically, after running "4. Install the bug fix: sudo moitessier/scripts/bug_fix_kernel_4.19.118 moitessier/dtbo/i2c-gpio_bug_fix_4.19.118.dtbo". I can then "sudo apt update" and "sudo apt full-upgrade"? Before I do anything, I want to check. Also, what are the ramifications of this bug fix? Does anything else brake when this is done? RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - Sailoog - 2020-06-25 (2020-06-23, 12:22 PM)jamieFL Wrote:(2020-06-22, 04:26 PM)Sailoog Wrote: Temporary fix: https://www.rooco.eu/2018/06/13/firmware-and-drivers-for-raspberry-pi-moitessier-hat/ yes you can (2020-06-23, 12:22 PM)jamieFL Wrote: Before I do anything, I want to check. Also, what are the ramifications of this bug fix? Does anything else brake when this is done? apparently no RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - jamieFL - 2020-06-27 I followed option 2 and my Pi would no longer boot. I edited config.txt as in option 1 and got it to boot, then updated again. With the sudo apt full-upgrade I get this error: Quote:****************************************************************************************** ...and it still will not boot. RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - jamieFL - 2020-06-28 I don't know what is going on, but I formatted my SD, put a fresh image of OpenPlotter Moitessier HAT (no update at end of install), installed MCS, Updated all apps, rebooted. All good. I followed option 2 and got the same results as above. Same errors and my Pi will NOT boot. RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - nebosa - 2020-06-29 (2020-06-28, 10:24 PM)jamieFL Wrote: I don't know what is going on, but I formatted my SD, put a fresh image of OpenPlotter Moitessier HAT (no update at end of install), installed MCS, Updated all apps, rebooted. All good. I followed option 2 and got the same results as above. Same errors and my Pi will NOT boot. Unfortunately I have to confirm that! I don't get it going according to the description RE: Raspbian bug kills Moitessier HAT systems after upgrading to kernel 4.19.118 - jamieFL - 2020-06-29 (2020-06-29, 06:36 PM)nebosa Wrote: Unfortunately I have to confirm that! I don't get it going according to the description Thank you. At least I know that I probably didn't to anything wrong. |