Small Notifications problem - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: Small Notifications problem (/showthread.php?tid=3929) |
Small Notifications problem - Lazzz - 2022-02-17 When I re-boot my Pi4 & OP2 is staring the "Check system" stalls at Notifications, for about 10 to 15 minutes, then continues but finishes with a warning. I have to go to Access request & re-set the Notifications to read/write then approve and all is well until I reboot again - then it all happens again - it's back to read only!! Doesn't happen if I restart SK. SK v1.41.3, Notifications v2.0.2 RE: Small Notifications problem - Sailoog - 2022-02-17 that is really strange, I can not reproduce this. Maybe a corrupt file? delete /home/pi/.signalk/security.json file and restarts signal k. You will keep your settings but you will need to set the login credentials again. RE: Small Notifications problem - Lazzz - 2022-02-17 (2022-02-17, 08:05 PM)Sailoog Wrote: that is really strange, I can not reproduce this. Maybe a corrupt file? Thanks Sailoog, I'll give that a try. It's not a real drama. RE: Small Notifications problem - MigGat - 2022-02-21 I'm facing a similar issue. Well, is excatly the same except that I don't experience the 10-15min delay. This are the steps I followed: 1) Delete .signalk/security.json 2) Reboot RPi 3) Give read/write permission to both access requests with timeout "NEVER" 4) Reboot 5) Check that there is a new permission request: Please note that .signalk/security.json already has this devices registered with read/write permissions AND with the same clientId: Code: "devices": [ Also note that there are no issues remembering the access permissions with other devices (like a remote ESP32 with SensESP) To add a bit more context the system check return this on boot: Code: Checking Notifications... And this on any posterior check: Code: Checking Notifications... RE: Small Notifications problem - Sailoog - 2022-02-21 Moltes gracies MigGat per aquest report, clarament hi ha alguna cosa que no funciona com ho hauria de fer i aquest error es una gran pista. I will try to reproduce this. Is this OpenPlotter 2 or 3. Signal K version? RE: Small Notifications problem - MigGat - 2022-02-21 I ara, reportar és el mínim que puc fer! This is OP2, with SignalK 1.41.3 Tested also on OP3 and the error is not there, but I’m not sure which SignalK version I have there. RE: Small Notifications problem - Lazzz - 2022-03-07 Any progress on this?? I deleted /home/pi/.signalk/security.json file but still does it every reboot - I timed it 13 minutes for "Checking notifications" to do it's stuff & then have to approve again. No real drama, I know you are real busy Sailoog so I'll just wait till V3 is ready. RE: Small Notifications problem - Sailoog - 2022-03-07 I can not reproduce this issue and I have no idea. Let me do more tests... RE: Small Notifications problem - Lazzz - 2022-03-10 Further on this, I uninstalled the Notifications app, with the intention of reinstalling it later, but now I get the exact same thing happening with "Checking GPIO". It checks for a while, then SK starts but with a warning. I have to go to Access request & re-set the GPIO to read/write then approve and all is well until I reboot again - then it all happens again - it's back to read only!! RE: Small Notifications problem - Sailoog - 2022-03-10 I have a theory, maybe your SK server has not started yet but the notifications app tries to check the status of the connection and when the server does not reply the app makes a request again. But that read only status kills me, it does not make sense... I will work on OpenPlotter Notofcations 3 this weekend and maybe can I find out something. |