Almost there with Maiana but.... - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Almost there with Maiana but.... (/showthread.php?tid=4117) |
Almost there with Maiana but.... - puz - 2022-06-21 After helpful hints from Peter Antyas and some terminal tinkering (Is Termite for Windows really the only option for provisioning via terminal? Seems so.), the big moment was to turn on the TX switch. I did so, the TX light went on and... ...nothing. The boat does not appear on AIS locally, nor in Open Marine which is really the only way for us to check. Everything seems to be on the level, the data stream is flowing nicely but nothing happens... All the TX switches are at 1, everything seems just fine in SignalK but nothing. There are also problems with Open Plotter Maiana not seeing the hardware, but I think the TX problem is unrelated. Any suggestions? RE: Almost there with Maiana but.... - Sailoog - 2022-06-21 (2022-06-21, 02:32 PM)puz Wrote: There are also problems with Open Plotter Maiana not seeing the hardware, but I think the TX problem is unrelated. openplotter version? openplotter-maiana app version? Go to openplotter-settings and enable debugging, then open a terminal and type "openplotter-maiana", try to connect with the hardware and put here any error. RE: Almost there with Maiana but.... - puz - 2022-06-23 (2022-06-21, 02:57 PM)Sailoog Wrote:(2022-06-21, 02:32 PM)puz Wrote: There are also problems with Open Plotter Maiana not seeing the hardware, but I think the TX problem is unrelated. I'm the same person who posted the thread at Maiana's Github about the problems of openplotter-maiana not seeing the hardware. Pasting in the relevant info from that thread: openplotter-maiana version 2.1.2 OpenCPN version 5.6.2 Settings version 2.9.1 Errors in terminal when running openplotter-maiana: Quote:[color=var(--color-fg-muted)]pi@openplotter:~ $ openplotter-maiana The next followup was to post the MCU / FW numbers, which I'll do when getting back to the boat. RE: Almost there with Maiana but.... - Sailoog - 2022-06-23 Ah ok. That 'x' being parsed as a number makes me think that yours MCU / FW numbers can contain something unexpected. RE: Almost there with Maiana but.... - puz - 2022-06-27 (2022-06-23, 01:05 PM)Sailoog Wrote: Ah ok. Good call! Here's some data from today: Path Value Units Timestamp SourceMAIANA.MCUtype "" 06/27 11:46:03 OpenPlotter.maiana MAIANA.bootloader "" 06/27 11:46:03 OpenPlotter.maiana MAIANA.breakoutGeneration "" 06/27 11:46:03 OpenPlotter.maiana MAIANA.channelA.noiseFloor 29 06/27 11:47:16 OpenPlotter.maiana MAIANA.channelB.noiseFloor 24 06/27 11:47:16 OpenPlotter.maiana MAIANA.firmwareRevision "3.3.1" 06/27 11:46:03 OpenPlotter.maiana MAIANA.hardwareRevision "11.x" 06/27 11:46:03 OpenPlotter.maiana MAIANA.serialNumber "" 06/27 11:46:03 OpenPlotter.maiana MAIANA.station.LOA 12 06/27 11:46:03 OpenPlotter.maiana MAIANA.station.MMSI "257XXXXXX" (Last 6 digits redacted) RE: Almost there with Maiana but.... - Sailoog - 2022-06-28 OpenPlotter.maiana MAIANA.hardwareRevision "11.x" You got it, that x should be a number, we should go back to github to ask Peter... RE: Almost there with Maiana but.... - puz - 2022-06-28 (2022-06-28, 10:54 AM)Sailoog Wrote: OpenPlotter.maiana Yup, the conversation continues here: https://github.com/peterantypas/maiana/discussions/111 |