Not getting serial data from ais in OP4 and raspPi bookworm - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Not getting serial data from ais in OP4 and raspPi bookworm (/showthread.php?tid=5247) |
Not getting serial data from ais in OP4 and raspPi bookworm - richardonaboat - 2024-03-13 So I'm getting ais data on /dev/ttyUSB0 and I can see it using putty. I can link USB0 to /dev/ttyOP_ais and add it to signalK. When I run "ls /dev/tty*" i can see both USB0 and ttyOP_ais and ttyOP_ais shows up on the SignalK dashboard. When I turn on the AIS I can see ais as the label and NMEA0183 as the type but I'm not getting any data. This is a Rasp Pi 4 running bookworm and OP 4 with the Serial app version 4.0.10 and SognalK version 2.6.2 I assume I'm missing something any suggestions please as to what I might be doing wrong |