2024-03-13, 04:01 PM
So I'm getting ais data on /dev/ttyUSB0 and I can see it using putty. I can link USB0 to /dev/ttyOP_ais and add it to signalK.
When I run "ls /dev/tty*" i can see both USB0 and ttyOP_ais and ttyOP_ais shows up on the SignalK dashboard.
When I turn on the AIS I can see ais as the label and NMEA0183 as the type but I'm not getting any data.
This is a Rasp Pi 4 running bookworm and OP 4 with the Serial app version 4.0.10 and SognalK version 2.6.2
I assume I'm missing something any suggestions please as to what I might be doing wrong
When I run "ls /dev/tty*" i can see both USB0 and ttyOP_ais and ttyOP_ais shows up on the SignalK dashboard.
When I turn on the AIS I can see ais as the label and NMEA0183 as the type but I'm not getting any data.
This is a Rasp Pi 4 running bookworm and OP 4 with the Serial app version 4.0.10 and SognalK version 2.6.2
I assume I'm missing something any suggestions please as to what I might be doing wrong