remote desktop crashing with compass calibration - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: remote desktop crashing with compass calibration (/showthread.php?tid=938) |
remote desktop crashing with compass calibration - Tkalvol - 2018-01-09 I am running OP 0.17 on a rpi 3 B with the rpi 7" touch screen. This has been giving me problems with accessing parts of some of the pop up screens due to the screen resolution. I have found I can work on most everything by using my win10 tablet and remote in with a sesman Xvnc connection. However, when I try to calibrate the compass the connection drops as the calibration screen comes up. Any ideas? Tom RE: remote desktop crashing with compass calibration - jim321 - 2018-01-09 i brought this up allready but i didn't try the workaround could you give it a try and report back.. http://forum.openmarine.net/showthread.php?tid=853 RE: remote desktop crashing with compass calibration - Tkalvol - 2018-01-09 Thank you. I read the other thread and solved my problem by changing the rpi touchscreen resolution. If you don't like the default resolution, you can change it in config.txt (sudo nano /boot/config.txt) from #framebuffer_width=1280 #framebuffer_height=720 to framebuffer_width=1280 framebuffer_height=720 or any other resolution (it could be that a monitor isn't able to sync the resolution, but we are talking about headless mode) framebuffer_width=1500 framebuffer_height=1000 This allowed the popup box to display properly so I could access all of the buttons and do the calibration. Thanks |