Posts: 3
Threads: 1
Joined: Feb 2022
Reputation:
0
Posts: 298
Threads: 4
Joined: Mar 2016
Reputation:
10
2022-02-11, 11:13 AM
(This post was last modified: 2022-02-11, 11:14 AM by holgerw.)
you have double acces to the serial port now. disable your data connect in signalk and let op-serial do it via connections-tab.
Posts: 3
Threads: 1
Joined: Feb 2022
Reputation:
0
I'm not very familiar with signalk, so maybe i did two connections. Anyway, in wich menù can i disable my data connections?
Posts: 298
Threads: 4
Joined: Mar 2016
Reputation:
10
in signalk the connections are in server / data connections.
have fun
Posts: 3
Threads: 1
Joined: Feb 2022
Reputation:
0
ok, so i've removed the connection by usb cable, and it was red, after that i puted again and it was green after refresh. I've deleted the serial from the application string, i'had to set up the device from openplotter/serial and "Add to signal K", but notting is changed, on Dashboard, there is no signal on right up corrner of the signal K. I don't know what i've to do