2024-03-29, 12:20 PM
(2024-03-29, 11:44 AM)Sailoog Wrote: HÃ¥kan,
I am not able to reproduce your issue, this is what I have done:
- Created a 16GB SD using "2023-12-29-OpenPlotter-v4-Starting-beta-64bit-img" and rpi-imager.
- After booting first time, I set the localization settings (timezone, language, keyboard and wifi country) in menu-preferences-raspberry configuration and reboot.
- After booting I ran "sudo apt update" and "sudo apt full-upgrade" in a terminal and reboot.
- After booting I opened "Signal K Installer" from menu-openplotter and the window of pending tasks opens. After clicking Start, Signal k is updated to latest version and everything works OK.
I do not know what is going on in your system. No one reported the same issue, so we can not find a pattern. Some ideas:
- Update rpi-imager.
- Try without applying localization settings.
- Try another SD.
- Try to do exactly the steps I did.
...
Thanks for your tries to reproduce it.
I've done it all according to your steps above.
The Rpi manager was already updated. I can of course try another SD and without any localization for a try.
For the moment I use another SD where I manually installed SignalK and openplotter-settings from CS. It run wo obstacles except the vcn-keyboard dept from your Github. It had to be replaced during install. But the system's inbound fix was able to install a correct one for my system.