2016-12-08, 09:45 PM
Thanks for this new version !
I'm playing around, with node-red and node dashboard on a raspberry Pi 3
Created a dashboard with temp + pressure based on the example flows in node-red. This worked fine.
Used an external web-browser to configure
System was running now for one day, but unfortunately it now shows disconnect page.
After reboot of the system i see in task manager that "node" is busy with say 25 % CPU load, And I can connect with my web browser to the server.
after 1 minute, the "node" task goes down to 0% and the browser disconnects.
Again reboot same result
The rest of the processes on openplotter seems to continue.
Checked diskspace = enough
Of course I can install an new image. But maybe we can find the root cause
G.
I'm playing around, with node-red and node dashboard on a raspberry Pi 3
Created a dashboard with temp + pressure based on the example flows in node-red. This worked fine.
Used an external web-browser to configure
System was running now for one day, but unfortunately it now shows disconnect page.
After reboot of the system i see in task manager that "node" is busy with say 25 % CPU load, And I can connect with my web browser to the server.
after 1 minute, the "node" task goes down to 0% and the browser disconnects.
Again reboot same result
The rest of the processes on openplotter seems to continue.
Checked diskspace = enough
Of course I can install an new image. But maybe we can find the root cause
G.