2020-06-27, 02:00 PM
(This post was last modified: 2020-06-27, 02:05 PM by baltika_no_9.)
Hi
Raspberry pi with OPv2, all packages up to date (signal K 1.31.0). I've installed a Waveshare 10DOF sensor (IMU9255/BMP280)
Set up the device in Pypilot and in the I2C sections, selected the appropriate sentence types in SignalK to nmea0183 tab (including XDR (TempAir).
I see temperature data in the SignalK data browser but nothing when I go to OpenCPN nmea debug window for temperature. Everything else is there (pitch and roll, mag heading etc) so I see nothing in my OpenCPN dashboard for AirTemp.
Using Python I can read directly from the sensor OK. It appears the SignalK temp info is not finding its way to nmea.
I'd be grateful if anyone could help me solve this.
Many thanks
Raspberry pi with OPv2, all packages up to date (signal K 1.31.0). I've installed a Waveshare 10DOF sensor (IMU9255/BMP280)
Set up the device in Pypilot and in the I2C sections, selected the appropriate sentence types in SignalK to nmea0183 tab (including XDR (TempAir).
I see temperature data in the SignalK data browser but nothing when I go to OpenCPN nmea debug window for temperature. Everything else is there (pitch and roll, mag heading etc) so I see nothing in my OpenCPN dashboard for AirTemp.
Using Python I can read directly from the sensor OK. It appears the SignalK temp info is not finding its way to nmea.
I'd be grateful if anyone could help me solve this.
Many thanks