2018-07-13, 07:50 PM
All NMEA 0183 data you get from serial or kplex tabs are sent to SK and automatically sent to TCP 10110.
All data you get from CAN tab or any sensor tab (GPIO, 1W, I2C...) are sent to SK and if you want to convert it to NMEA 0183 you have to use the "SK to NMEA 0183" SK plugin and it will be sent to TCP 10110 too.
when you connect a serial device and assign it to NMEA 0183 output in serial tab, you will send TCP 10110 data by this device with all the NMEA 0183 data of your system.
All data you get from CAN tab or any sensor tab (GPIO, 1W, I2C...) are sent to SK and if you want to convert it to NMEA 0183 you have to use the "SK to NMEA 0183" SK plugin and it will be sent to TCP 10110 too.
when you connect a serial device and assign it to NMEA 0183 output in serial tab, you will send TCP 10110 data by this device with all the NMEA 0183 data of your system.