(2020-01-13, 08:46 AM)glowntiger Wrote: Hi,
I do not know how the SPI driver for the Moitessier works. The MCS uses SPI CE1. Moitessier CE0 so it should no problem....
I have tested yesterday the MCS with a second device on CE0 and all works.
Can you tap
Code:ls /dev/
and make a screenshot?
When an Moitessier hat is availible I buy one and can test it by my own....
So not to spam this thread I have make this:
http://forum.openmarine.net/showthread.php?tid=2233
Ecco:
pi@openplotter:~ $ ls /dev/
argon-h264mem loop6 rpivid-intcmem tty36 ttySC5
argon-hevcmem loop7 rpivid-vp9mem tty37 uhid
argon-intcmem loop-control sda tty38 uinput
argon-vp9mem mapper sda1 tty39 urandom
autofs media0 serial0 tty4 usb
block mem serial1 tty40 v4l
bsg memory_bandwidth sg0 tty41 vchiq
btrfs-control mmcblk0 shm tty42 vcio
bus mmcblk0p1 snd tty43 vc-mem
cachefiles mmcblk0p2 stderr tty44 vcs
char moitessier.ctrl stdin tty45 vcs1
console moitessier.spi stdout tty46 vcs2
cpu_dma_latency moitessier.tty tty tty47 vcs3
cuse mqueue tty0 tty48 vcs4
disk net tty1 tty49 vcs5
dri network_latency tty10 tty5 vcs6
fb0 network_throughput tty11 tty50 vcs7
fd null tty12 tty51 vcsa
full port tty13 tty52 vcsa1
fuse ppp tty14 tty53 vcsa2
gpiochip0 ptmx tty15 tty54 vcsa3
gpiochip1 pts tty16 tty55 vcsa4
gpiochip2 ram0 tty17 tty56 vcsa5
gpiochip3 ram1 tty18 tty57 vcsa6
gpiochip4 ram10 tty19 tty58 vcsa7
gpiochip5 ram11 tty2 tty59 vcsm
gpiomem ram12 tty20 tty6 vcsm-cma
hidraw0 ram13 tty21 tty60 vcsu
hidraw1 ram14 tty22 tty61 vcsu1
hidraw2 ram15 tty23 tty62 vcsu2
hwrng ram2 tty24 tty63 vcsu3
i2c-1 ram3 tty25 tty7 vcsu4
i2c-3 ram4 tty26 tty8 vcsu5
initctl ram5 tty27 tty9 vcsu6
input ram6 tty28 ttyAMA0 vcsu7
kmsg ram7 tty29 ttyOP_moitess vga_arbiter
log ram8 tty3 ttyprintk vhci
loop0 ram9 tty30 ttyS0 video10
loop1 random tty31 ttySC0 video11
loop2 raw tty32 ttySC1 video12
loop3 rfkill tty33 ttySC2 watchdog
loop4 rpivid-h264mem tty34 ttySC3 watchdog0
loop5 rpivid-hevcmem tty35 ttySC4 zero
pi@openplotter:~ $
(2020-01-13, 11:14 AM)Max1947 Wrote:(2020-01-13, 08:46 AM)glowntiger Wrote: Hi,
I do not know how the SPI driver for the Moitessier works. The MCS uses SPI CE1. Moitessier CE0 so it should no problem....
I have tested yesterday the MCS with a second device on CE0 and all works.
Can you tap
Code:ls /dev/
and make a screenshot?
When an Moitessier hat is availible I buy one and can test it by my own....
So not to spam this thread I have make this:
http://forum.openmarine.net/showthread.php?tid=2233
Ecco:
pi@openplotter:~ $ ls /dev/
argon-h264mem loop6 rpivid-intcmem tty36 ttySC5
argon-hevcmem loop7 rpivid-vp9mem tty37 uhid
argon-intcmem loop-control sda tty38 uinput
argon-vp9mem mapper sda1 tty39 urandom
autofs media0 serial0 tty4 usb
block mem serial1 tty40 v4l
bsg memory_bandwidth sg0 tty41 vchiq
btrfs-control mmcblk0 shm tty42 vcio
bus mmcblk0p1 snd tty43 vc-mem
cachefiles mmcblk0p2 stderr tty44 vcs
char moitessier.ctrl stdin tty45 vcs1
console moitessier.spi stdout tty46 vcs2
cpu_dma_latency moitessier.tty tty tty47 vcs3
cuse mqueue tty0 tty48 vcs4
disk net tty1 tty49 vcs5
dri network_latency tty10 tty5 vcs6
fb0 network_throughput tty11 tty50 vcs7
fd null tty12 tty51 vcsa
full port tty13 tty52 vcsa1
fuse ppp tty14 tty53 vcsa2
gpiochip0 ptmx tty15 tty54 vcsa3
gpiochip1 pts tty16 tty55 vcsa4
gpiochip2 ram0 tty17 tty56 vcsa5
gpiochip3 ram1 tty18 tty57 vcsa6
gpiochip4 ram10 tty19 tty58 vcsa7
gpiochip5 ram11 tty2 tty59 vcsm
gpiomem ram12 tty20 tty6 vcsm-cma
hidraw0 ram13 tty21 tty60 vcsu
hidraw1 ram14 tty22 tty61 vcsu1
hidraw2 ram15 tty23 tty62 vcsu2
hwrng ram2 tty24 tty63 vcsu3
i2c-1 ram3 tty25 tty7 vcsu4
i2c-3 ram4 tty26 tty8 vcsu5
initctl ram5 tty27 tty9 vcsu6
input ram6 tty28 ttyAMA0 vcsu7
kmsg ram7 tty29 ttyOP_moitess vga_arbiter
log ram8 tty3 ttyprintk vhci
loop0 ram9 tty30 ttyS0 video10
loop1 random tty31 ttySC0 video11
loop2 raw tty32 ttySC1 video12
loop3 rfkill tty33 ttySC2 watchdog
loop4 rpivid-h264mem tty34 ttySC3 watchdog0
loop5 rpivid-hevcmem tty35 ttySC4 zero
pi@openplotter:~ $
[img][/img]