Hello,
When I connect both the IMU and Temp/Hum sensor I get random garbled values on the temp/hum. When I disconnect or disable the IMU I get normal values on Temp/hum.
After a reset and restart the temp/hum is not detected anymore.
I've wired the SDA SDC tight together, I use a MPU-9250 IMU sensor and HKU and a HTU21D Temp/hum sensor.
Any ideas?
Regards
When I connect both the IMU and Temp/Hum sensor I get random garbled values on the temp/hum. When I disconnect or disable the IMU I get normal values on Temp/hum.
After a reset and restart the temp/hum is not detected anymore.
I've wired the SDA SDC tight together, I use a MPU-9250 IMU sensor and HKU and a HTU21D Temp/hum sensor.
Any ideas?
Regards