Posts: 23
Threads: 5
Joined: Jul 2016
Reputation:
0
I think I have setup KPLEX the correct way, however, when applying the settings and KPLEX restarts I get the error:
openplotter kplex [1768]; No Inputs!
Error: Can't restart Kplex
Any idea?
Posts: 1,179
Threads: 98
Joined: Mar 2016
Reputation:
70
(2020-08-01, 12:57 PM)henker Wrote: I think I have setup KPLEX the correct way, however, when applying the settings and KPLEX restarts I get the error:
openplotter kplex [1768]; No Inputs!
Error: Can't restart Kplex
Any idea?
What is it you're trying to do? The multiplexing which used to happen in kplex can be done in signalk easier now, same with logging data.
.
Posts: 23
Threads: 5
Joined: Jul 2016
Reputation:
0
(2020-08-01, 01:47 PM)PaddyB Wrote: (2020-08-01, 12:57 PM)henker Wrote: I think I have setup KPLEX the correct way, however, when applying the settings and KPLEX restarts I get the error:
openplotter kplex [1768]; No Inputs!
Error: Can't restart Kplex
Any idea?
What is it you're trying to do? The multiplexing which used to happen in kplex can be done in signalk easier now, same with logging data.
.
Yes it can, however, it is a lot more difficult to set filters in signal K. I'm not using any of the functionalities of signal K....
Posts: 19
Threads: 2
Joined: May 2019
Reputation:
1
FYI, there's another thread on this same topic:
https://forum.openmarine.net/showthread.php?tid=2421
Current status is that it seems that no one knows what's wrong with it, not sure if anyone is working to fix it, and the solution seems to be to accomplish whatever you were trying to do with some other method such as Node Red or Signal K, despite the simplicity of your prior implementation of KPLEX.
Chad
Posts: 23
Threads: 5
Joined: Jul 2016
Reputation:
0
(2020-08-10, 09:34 PM)we9v Wrote: FYI, there's another thread on this same topic:
https://forum.openmarine.net/showthread.php?tid=2421
Current status is that it seems that no one knows what's wrong with it, not sure if anyone is working to fix it, and the solution seems to be to accomplish whatever you were trying to do with some other method such as Node Red or Signal K, despite the simplicity of your prior implementation of KPLEX.
Chad
Thanks Chad,
I have decided to stop using Kplex and Signal K. I'm just using OCPN as there it is a lot easier to apply filters. This winter when I have some time I will invest some time to see how to do this in Signal K. Maybe by then, Kplex will be fixed...
Henk
Posts: 1,179
Threads: 98
Joined: Mar 2016
Reputation:
70
(2020-08-10, 10:50 PM)henker Wrote: Thanks Chad,
I have decided to stop using Kplex and Signal K. I'm just using OCPN as there it is a lot easier to apply filters. This winter when I have some time I will invest some time to see how to do this in Signal K. Maybe by then, Kplex will be fixed...
Henk
What is it you need to filter?
Seems extreme throwing out something s useful as signalk which must be able to do pretty much anything you could think of with data..
Posts: 23
Threads: 5
Joined: Jul 2016
Reputation:
0
(2020-08-11, 07:50 AM)PaddyB Wrote: (2020-08-10, 10:50 PM)henker Wrote: Thanks Chad,
I have decided to stop using Kplex and Signal K. I'm just using OCPN as there it is a lot easier to apply filters. This winter when I have some time I will invest some time to see how to do this in Signal K. Maybe by then, Kplex will be fixed...
Henk
What is it you need to filter?
Seems extreme throwing out something s useful as signalk which must be able to do pretty much anything you could think of with data..I have mul
I have multiple (4x) inputs. 3 of them all have position, SOG and COG. I want to use the Pos, cog and sog from only one source. Besides that (and this could be a hardware issue), I find the PI is using too much CPU (RPI 3B+) when using SignalK. I see the "node" application go op to 160% CPU usage. What this is causing is that when activating a route, the pi becomes unusable and I need to reboot...
Posts: 1,179
Threads: 98
Joined: Mar 2016
Reputation:
70
(2020-08-11, 11:34 AM)henker Wrote: (2020-08-11, 07:50 AM)PaddyB Wrote: (2020-08-10, 10:50 PM)henker Wrote: Thanks Chad,
I have decided to stop using Kplex and Signal K. I'm just using OCPN as there it is a lot easier to apply filters. This winter when I have some time I will invest some time to see how to do this in Signal K. Maybe by then, Kplex will be fixed...
Henk
What is it you need to filter?
Seems extreme throwing out something s useful as signalk which must be able to do pretty much anything you could think of with data..I have mul
I have multiple (4x) inputs. 3 of them all have position, SOG and COG. I want to use the Pos, cog and sog from only one source. Besides that (and this could be a hardware issue), I find the PI is using too much CPU (RPI 3B+) when using SignalK. I see the "node" application go op to 160% CPU usage. What this is causing is that when activating a route, the pi becomes unusable and I need to reboot... Sounds likely you have a loop, do you have an output to an autopilot from opencpn? Sounds like some data could be getting sent from opencpn then gets sent back in again then back out again then....
For the multiple gps sentences, why don't you filter out the nmea sentences you don't want in the connections setup?
Posts: 23
Threads: 5
Joined: Jul 2016
Reputation:
0
(2020-08-11, 02:52 PM)PaddyB Wrote: (2020-08-11, 11:34 AM)henker Wrote: (2020-08-11, 07:50 AM)PaddyB Wrote: (2020-08-10, 10:50 PM)henker Wrote: Thanks Chad,
I have decided to stop using Kplex and Signal K. I'm just using OCPN as there it is a lot easier to apply filters. This winter when I have some time I will invest some time to see how to do this in Signal K. Maybe by then, Kplex will be fixed...
Henk
What is it you need to filter?
Seems extreme throwing out something s useful as signalk which must be able to do pretty much anything you could think of with data..I have mul
I have multiple (4x) inputs. 3 of them all have position, SOG and COG. I want to use the Pos, cog and sog from only one source. Besides that (and this could be a hardware issue), I find the PI is using too much CPU (RPI 3B+) when using SignalK. I see the "node" application go op to 160% CPU usage. What this is causing is that when activating a route, the pi becomes unusable and I need to reboot... Sounds likely you have a loop, do you have an output to an autopilot from opencpn? Sounds like some data could be getting sent from opencpn then gets sent back in again then back out again then....
For the multiple gps sentences, why don't you filter out the nmea sentences you don't want in the connections setup?
Thanks, I'll give it a try!
|