This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[EN - SOURCE] Documentation status
#1
Information 
Red status: Contents of this chapter still need software development. Do not write it yet.
Blue status: Software development of this chapter is finished. You can write/update it and take screenshots.
Green status: Documentation of this chapter is finished and ready for translation.

Guidelines to collaboratehttps://docs.sailoog.com/openplotter-v1-...ollaborate

If you want to translate the documentation to your language send us an email to coordinate: http://www.sailoog.com/contact

Chapters: under construction
  Reply
#2
Compass page should be updated with this wisdom from Sean:

The calibration is automatic and continuous unless you "lock" it.

The calibration window, is only a client and just a visual display. There can be any number of these. You can connect to the pypilot server to see the calibration on a remote host by typing "pypilot_calibration host" on the command line.

The calibration only determines the 3 compass bias, the overall magnetic field strength and the inclination. These values need to be continuously updated to ensure correct operation.

It doesn't find the alignment to level (2 angles) or the alignment to the compass (1 angle) which need to be manually set whenever the sensors are remounted in the boat.
  Reply
#3
Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x
  Reply
#4
(05-16-2018, 12:39 PM)Sailoog Wrote: Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x

Hey,
Will you tell me how I can deal with the French traduction? (mañana ;-) )
  Reply
#5
(06-06-2018, 09:08 AM)JeanRCA Wrote:
(05-16-2018, 12:39 PM)Sailoog Wrote: Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x

Hey,
Will you tell me how I can deal with the French traduction? (mañana ;-) )

Avui (today in Catalan ;-) )
I will send you an invitation by private.
Now you will be autonomous and I will not be a bottle neck, thanks!
  Reply
#6
(06-06-2018, 12:23 PM)Sailoog Wrote:
(06-06-2018, 09:08 AM)JeanRCA Wrote:
(05-16-2018, 12:39 PM)Sailoog Wrote: Thanks. Working on the new docs now: https://docs.sailoog.com/openplotter-v1-x-x

Hey,
Will you tell me how I can deal with the French traduction? (mañana ;-) )

Avui (today in Catalan ;-) )  
I will send you an invitation by private.
Now you will be autonomous and I will not be a bottle neck, thanks!

Avui is much more efficient than mañana ;-)
I'm on my way
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)