2018-03-10, 03:52 PM
(2018-03-09, 04:53 PM)SkipperEarly Wrote: I also noticed that sensor data like humidity,temperature and pressure are not transmitted automatically after restart. Once I open the NMEA183 generator and select e.g. pressure - make no changes but click ok, the data are transmitted as expected.
Maybe a - restart option of the nmea generator would help to isolate the problem further.
op 17.1
I believe that SignalK is restarted when you press OK on the NMEA-Generator tab. Could you try if just restarting SignalK (e.g. on the SignalK tab) does the trick?
fair winds
Christian