Hi! I have set up my RTL-SDR VHF according to the instructions, but I do not see any data coming through into SignalK. I am not at the boat and perhaps there are no AIS ships in range, but can I verify that my setup is correct? Should I see some data still?
Hi.
I'm using SDR VHF 2.1.1 and the newest openplotter available for download. I'm trying to calibrate my AIS, have followed the guide, but when I try to calibrate the device, it start to do it's thing, but when I press ctrl+c, the terminal window closes so fast, I cant read the result.
When I try to execute "rtl_test" in a new terminal window, it stops at:
//
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: AIS
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 8 bytes
//
Anyone know what I'm doing wrong?
Hi -
Trying to install SRD VHF while running Settings 3.4.4. The app shows up in the OpenPlotter Apps menu, but even after Refresh, Installed is blank, and so are Candidate and Pending Tasks. And of course, the Install button is not active. Is the app available for this version/release of Settings?
Suggestions?
Thanks!