OpenMarine - Schematic or instructions to connect IMU to RPI pins

I have spent about an hour searching around and I just cannot seem to find anything.

I purchased this IMU breakout board
https://www.digikey.ca/en/products/detai...62/6166011

and I want to try and build my own IMU hat but I cannot seem to find any instructions/schematics on which pins go to which pins.

I figure I am missing something glaringly obvious...

(2020-08-09, 04:03 PM)rastam4n Wrote: [ -> ]I have spent about an hour searching around and I just cannot seem to find anything.

I purchased this IMU breakout board
https://www.digikey.ca/en/products/detai...62/6166011

and I want to try and build my own IMU hat but I cannot seem to find any instructions/schematics on which pins go to which pins.

I figure I am missing something glaringly obvious...

Hi, maybe it can help you: https://maker.pro/raspberry-pi/tutorial/...spberry-pi Cool

(2020-08-09, 04:23 PM)Max1947 Wrote: [ -> ]
(2020-08-09, 04:03 PM)rastam4n Wrote: [ -> ]I have spent about an hour searching around and I just cannot seem to find anything.

I purchased this IMU breakout board
https://www.digikey.ca/en/products/detai...62/6166011

and I want to try and build my own IMU hat but I cannot seem to find any instructions/schematics on which pins go to which pins.

I figure I am missing something glaringly obvious...

Hi, maybe it can help you: https://maker.pro/raspberry-pi/tutorial/...spberry-pi

Thank you!