OpenMarine

Full Version: Perfectly waterproof RF remote controls usable with Pypilot
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4
(2022-08-24, 10:11 PM)Jean-Marc Douroux Wrote: [ -> ]Hi mgrouch

With Sean's hat, you need one or more 433 MHz radio remote controls with code EV1527. It is desirable that they are waterproof. The link remote control is a bluetooth one which cannot be used.

For an autopilot, it is prudent to use a pi0 independent of the onboard computer. The connection is easily made by wifi between the autopilot and the onboard computer. This makes it possible to operate the autopilot without having to operate the onboard computer for safety and also for lower power consumption.

Why do you think it wouldn't be possible to write a driver for bluetooth device which would recognize which button is pressed and from that driver
send a command to pypilot (command which correspond to the pressed button)?
For nearly a year and a half, my three radio remote controls on board have always worked perfectly even though they are often very wet. I haven't had to replace the batteries yet.

Some new links to buy a 433 MHz waterproof remote control with code EV1527. They are also found under the designation learning code 1527

https://www.aliexpress.com/item/10050033...why2zfVqSz

https://www.aliexpress.com/item/40008235...pt=glo2fra
Pages: 1 2 3 4