OpenMarine

Hi,

after my experience with Bulleseye and OP V 3.x I decided to use Buster and OP V 2.x with my Raspberry PI 4.
Unfortunately I'm getting into a boot loop at the beginning of the installation. 

Basically there a "two" error messages:

- start4.elf is not compatible
- your board requires a newer software

anyone knows how to fix this?

Thanks

It's a known issue - as far as I'm aware it's fixed in OP3 but not OP2:

https://forum.openmarine.net/showthread....start4.elf

Thanks, I "fixed" it by flashing the original Buster image from Raspberry.