(solved) Noobs for Openplotters hangs at Boot - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: (solved) Noobs for Openplotters hangs at Boot (/showthread.php?tid=1199) Pages:
1
2
|
(solved) Noobs for Openplotters hangs at Boot - waldmattis - 2018-06-03 Good morning. This morning I downloaded Noobs for Openplotters. I formatted a sd-card with SD-Formatter and unzipped the file to the freshly formatted sd-card. I put the card into my Raspberry Pi 2 rev. B and switched Power on. Immidiately the Green LED lighted without a break. After 30 minutes I shut down. Is this hanging on boot a known problem? Is there any help? Regards Karl Noobs for Openplotters hangs at Boot - CottageCruiser - 2018-06-03 After unzipping you must move the files away from the directory "Openplotter" to the upper level. Otherwise it won't boot. Lähetetty minun TA-1032 laitteesta Tapatalkilla RE: Noobs for Openplotters hangs at Boot - jim321 - 2018-06-03 " unzipped the file to the freshly formatted sd-card." unzip in same folder open the unzipped folder to NOOBS_v2_8_1 open that to show all those files select all copy paste to a fresh formatted card if you unzip strait to the card those files are two folders deep and it wont see them to start the boot RE: Noobs for Openplotters hangs at Boot - waldmattis - 2018-06-03 (2018-06-03, 11:32 AM)CottageCruiser Wrote: After unzipping you must move the files away from the directory "Openplotter" to the upper level. Otherwise it won't boot. Yes, I moved the files outside the folder and deleted the (now empty) folder. (2018-06-03, 11:32 AM)jim321 Wrote: " unzipped the Yes, I moved the files outside the folder and deleted the (now empty) folder. Noobs for Openplotters hangs at Boot - CottageCruiser - 2018-06-03 And there were no folders anymore, just plain files? Lähetetty minun TA-1032 laitteesta Tapatalkilla RE: Noobs for Openplotters hangs at Boot - waldmattis - 2018-06-03 (2018-06-03, 12:07 PM)CottageCruiser Wrote: And there were no folders anymore, just plain files? No, I see 3 folders - defaults - os - overlays and 18 plain files Thank you very much Karl RE: Noobs for Openplotters hangs at Boot - CottageCruiser - 2018-06-03 (2018-06-03, 04:29 PM)waldmattis Wrote:Was your sd formatted as FAT32?(2018-06-03, 12:07 PM)CottageCruiser Wrote: And there were no folders anymore, just plain files? Lähetetty minun TA-1032 laitteesta Tapatalkilla RE: Noobs for Openplotters hangs at Boot - waldmattis - 2018-06-03 (2018-06-03, 04:57 PM)CottageCruiser Wrote:(2018-06-03, 04:29 PM)waldmattis Wrote:Was your sd formatted as FAT32?(2018-06-03, 12:07 PM)CottageCruiser Wrote: And there were no folders anymore, just plain files? I will Check that. Thx Karl Noobs for Openplotters hangs at Boot - Alpenskipper - 2018-06-03 It takes 30-60 min for the first NOOBS install. RE: Noobs for Openplotters hangs at Boot - jim321 - 2018-06-03 maybe longer with a Raspberry Pi 2 rev. B |