Boot Raspberry Pi / OpenPlotter 2 From USB SSD - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How I did it (https://forum.openmarine.net/forumdisplay.php?fid=6) +--- Thread: Boot Raspberry Pi / OpenPlotter 2 From USB SSD (/showthread.php?tid=2514) |
RE: Boot Raspberry Pi / OpenPlotter 2 From USB SSD - aitonos - 2021-04-22 (2021-04-22, 09:29 AM)SkipperEarly Wrote:(2021-04-18, 11:05 PM)aitonos Wrote: Then, your hat broke? Bricked? Thanks for your confirmation. Did you use the above method to clonethe OS to the SSD and instruct PI4 to boot from SSD? Can you please share? Thanks! RE: Boot Raspberry Pi / OpenPlotter 2 From USB SSD - aitonos - 2021-04-26 (2020-08-29, 03:48 PM)jamieFL Wrote: OK. I finally did it and the Moitessier HAT works...and here is how. HI, trying to make the PI bootable from SSD, I followed these instructions , got the release version of the bootloader, identical to the one posted but I can't make HAT work as it is not compatible with the kernel, I get always error intalling any of the firmwares. Any help? Please! RE: Boot Raspberry Pi / OpenPlotter 2 From USB SSD - aitonos - 2021-04-28 (2021-04-22, 09:29 AM)SkipperEarly Wrote:(2021-04-18, 11:05 PM)aitonos Wrote: Then, your hat broke? Bricked? By the way, I followed these instructions and my HAT stopped working as its driver is not compatible with this kernel. So I had to install Kernel 5.10.11 which is the last supported by Moitessier. I posted how to do it in another thread; the key is combine rpi-update with the hash of the kernel we want to install, otherwise, it installs the latest stable firmware. I couln'dt check yet if I can boot from SSD as I did all the work via VNC. RE: Boot Raspberry Pi / OpenPlotter 2 From USB SSD - Sailoog - 2021-04-28 Please avoid any instructions containing "sudo rpi-update" because that will install the beta kernel and openplotter (or moitessier hat drivers) will never support beta kernels, only stable kernels are supported. RE: Boot Raspberry Pi / OpenPlotter 2 From USB SSD - aitonos - 2021-04-28 (2021-04-28, 12:41 PM)Sailoog Wrote: Please avoid any instructions containing "sudo rpi-update" because that will install the beta kernel and openplotter (or moitessier hat drivers) will never support beta kernels, only stable kernels are supported. Yes, that was what happened to me and I had to install the kernel with the HASH to match the right one for the HAT. @jamieFL , can you please chgeck and edit? Thanks! |