Signal K server hangs - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Signal K server hangs (/showthread.php?tid=2985) |
Signal K server hangs - Guttagrynna - 2020-10-05 I am doing an electronic compass project, with an IMU connected to my rPI. I connect it to Signal K through Pypilot. Since update to Signal K 1.34.0 the server hangs after about a minute, so that nothing shows in the Data Browser or in the Server Log. Things worked great during version 1.33.0 but I had the same problem in version 1.32.0. What can be done? Where should I look to fix it? Or should I just wait for things to get more mature and stable? [Edit]: I run "sudo systemctl restart signalk.service", and it works again, for about a minute. The web interface, however, is unresponsive so I can't restart Signal K from there. RE: Signal K server hangs - mgrouch - 2020-10-05 (2020-10-05, 05:42 PM)Guttagrynna Wrote: I am doing an electronic compass project, with an IMU connected to my rPI. I connect it to Signal K through Pypilot. Since update to Signal K 1.34.0 the server hangs after about a minute, so that nothing shows in the Data Browser or in the Server Log. Things worked great during version 1.33.0 but I had the same problem in version 1.32.0. What can be done? Where should I look to fix it? Or should I just wait for things to get more mature and stable? SignalK has a support channel on Slack You can download slack mobile app. The channel name SignalK-dev. It’s a very active and responsive channel. Thanks RE: Signal K server hangs - Guttagrynna - 2020-10-05 (2020-10-05, 08:03 PM)mgrouch Wrote: SignalK has a support channel on Slack |