absent sailgauge, strange data connection source name, and some other glitches

absent sailgauge, strange data connection source name, and some other glitches - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: absent sailgauge, strange data connection source name, and some other glitches (/showthread.php?tid=3608)

absent sailgauge, strange data connection source name, and some other glitches - romx - 2021-08-31

Hi,
I just install an OpenPlotter and trying to poke my setup there and here.
As a newbie in openplotter I meet with some strange things and looking for a word of wisdom from more experienced.

First of all, I find my "Sailgauge" page absent.

Filename: 2021-08-30_14-24-02.png Size: 5.39 KB 2021-08-31, 03:11 PM

I check my logs and, yes, it's 404 error.

Filename: 2021-08-30_14-24-17.png Size: 9.68 KB 2021-08-31, 03:12 PM

App Sail Gauges on Dashboards 2.2.3 marked as "installed"
It's only in my installation, or common problem?

Second one strange thing I find it's a strange datasource, appeared in SignalK dashboard. It comes after some hours (!?) after first start of SK (can't remember a moment).
What is it, and how to make this name human readable?

Filename: 2021-08-30_14-20-50.png Size: 38.76 KB 2021-08-31, 03:16 PM

Clickin on it gave me no useful information.

Filename: 2021-08-30_14-21-21.png Size: 42.66 KB 2021-08-31, 03:17 PM

Is it needed for my setup, or it's just glitch?

Last one issue is my Node-RED page. After installing and opening it I see no interface elements, just this one:

Filename: 2021-08-30_14-30-47.png Size: 16.12 KB 2021-08-31, 03:22 PM

How can I fix it and starting to use a Node-RED?

My setup is RPi4 with PICAN-M hat and recent OpenPlotter version, SDR dongle and some sensors (BMP280, MPU9255, HTU21D), pyPilot, Lip Node-RED, Grafana, Influxdb/Chronograf/Kapacitor.