+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Documentation (https://forum.openmarine.net/forumdisplay.php?fid=16)
+--- Thread: 1w sensor (/showthread.php?tid=3877)
1w sensor - Finbar J - 2022-01-17
Hi All
I just got my hands on a 1W temperature sensor and wanted to perhap fit it to the engine.
I wasnt able to find any 1W documentation in the current manual (before I make magic smoke and break something else!)
I did find an old github article from Sailoog here: https://github.com/sailoog/openplotter-documentation/blob/master/en/1w-temperature-sensor.md
But the link here to the chapter in the manual is 404....
Am I missing something?
Thanks very much
JFJ
RE: 1w sensor - Sailoog - 2022-01-18
You need to use the OpenPlotter GPIO app. Sorry, the current documentation is not complete but you can have an idea of the connection to avoid magic smoke: https://openplotter.readthedocs.io/en/2.x.x/gpio/gpio_app.html
RE: 1w sensor - Finbar J - 2022-01-21
(2022-01-18, 08:48 PM)Sailoog Wrote: You need to use the OpenPlotter GPIO app. Sorry, the current documentation is not complete but you can have an idea of the connection to avoid magic smoke: https://openplotter.readthedocs.io/en/2.x.x/gpio/gpio_app.html
Thanks Sailoog
When I fit I will take a few pics and see if I can update the manual.
Regards
Finbar