![]() |
OpenPlotter 3 roadmap - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: OpenPlotter 3 roadmap (/showthread.php?tid=3878) |
RE: OpenPlotter 3 roadmap - Boatingbaileys - 2022-05-09 (2022-05-08, 07:11 PM)Sailoog Wrote: Now you do not need InfluxDB or any intermediate program to get real time data into Grafana from a Signal K server. Just using a websocket plugin in Grafana and some easy settings. Thats really cool! Something i've tried to trick Grafana into doing in this and other projects. How is historical data used now? Do you still need the plugin if you want to look back? RE: OpenPlotter 3 roadmap - Sailoog - 2022-05-09 If you need history you need to use InfluxDB, once you have your data stored in influxDB you can use InfluxDB dashboards to show your data or use grafana to read from influxDB. I do not have time to write an InfluxDB manual but it is really intuitive, you just need to install IndluxDB from openplotter-dashboard app, after installtion go to http://localhost:8086, follow instrucctions to create a user, an organization, a bucket for your data and a token to read/write your bucket. Finally go back to openplotter-dashboard, select InfluxDB OSS, click edit and add the desired Signal K keys to store and the intervals. To check your stored data go to http://localhost:8086, click "Explore" and build your dashboards. Tips: Create one token to read/write all buckets. Create different buckets with different data retention policy to save your SD space. Be conservative with the intervals, you do not need to check the Signal k server every 5 seconds for air pressure, probably 10 minutes is OK. RE: OpenPlotter 3 roadmap - TVR - 2022-05-09 I've followed the Grafana instructions, it all seems to be working except I can only see data from the previous couple of minutes. Does Grafana store the historical data anywhere, or does it just visualise what it sees from the websocket interface? RE: OpenPlotter 3 roadmap - Boatingbaileys - 2022-05-09 (2022-05-09, 11:35 AM)Sailoog Wrote: If you need history you need to use InfluxDB, once you have your data stored in influxDB you can use InfluxDB dashboards to show your data or use grafana to read from influxDB. Thanks Sailoog - I'm happy to help with documentation as that's how I've got my current setup. Still, live data in Grafana will be really good @TVR - Grafaana is just a display/graphical package. You need to add a DB if you want to look at anything historical. RE: OpenPlotter 3 roadmap - Sailoog - 2022-05-09 I think my previous post answers your questions. RE: OpenPlotter 3 roadmap - Sailoog - 2022-05-09 (2022-05-07, 09:22 PM)Opie91 Wrote: Regarding the VNC issues. This seems to have been a problem for some time. If you plug a monitor in when you power up the PI it seems to do fine. Think I found a work around, this is from my notes: Did not work for me ![]() Code: (opencpn:2): Gdk-ERROR **: 18:58:29.512: The program 'opencpn' received an X Window System error. RE: OpenPlotter 3 roadmap - TVR - 2022-05-09 (2022-05-09, 11:52 AM)Sailoog Wrote: I think my previous post answers your questions. The only reason I asked is because your screenshots seemed to show temperature during the last 5 minutes, whereas I'm only able to display data during the last 90 seconds. In any case, it seems to be better suited to displaying dials and gauges rather than time series graphs. If I need a graph I'll use InfluxDB. RE: OpenPlotter 3 roadmap - Opie91 - 2022-05-10 (2022-05-09, 07:00 PM)Sailoog Wrote:(2022-05-07, 09:22 PM)Opie91 Wrote: Regarding the VNC issues. This seems to have been a problem for some time. If you plug a monitor in when you power up the PI it seems to do fine. Think I found a work around, this is from my notes: I tried to duplicate everything you have here and I cannot get my setup to fail with the cmdline.txt changes installed. Originally I was having a very slow VNC experience and this is how I ended up trying the change: https://forums.raspberrypi.com/viewtopic.php?t=323294&start=50 RE: OpenPlotter 3 roadmap - romton - 2022-05-10 (2022-04-27, 08:37 AM)wellenvogel Wrote:Quote:Tried to run it from command line with same results. Soon as I shut off the Avnav service all is wellCould you check if the problem still exists if you disable the ocharts plugin in AvNav? Hi, I have the same issue and indeed OpenCPN FP works fine when AvNav is stopped but doesn't open when AvNav is running. I disabled the ocharts plugin in AvNav and OpenCPN FP shows up with AvNav running but it is unstable, I can't even access the options. Please let me know if there is anything I can do to help. Best regards. Romain RE: OpenPlotter 3 roadmap - ALROCHARARI - 2022-05-12 My first tests: I used OpenPlotter 3 Starting 2022-02-06-OpenPlotter-v3-alpha-64bit-img.zip Applied defauts initial configuration steps Will go for Belgian options with French keyboard Changed screen resolution to 1920x1080 Changed GPU memory to 256Mb Rebooted and had following error: "[ 1.535413] mmc1: Controller never released inhibit bit(s)." WHAT TO DO? Installed Signal-K Installer 3.1.2-beta from Settings 3.2.1 No issues Made a connection to setup admin account Installed XyGrib 1.2.6-3bullseye1 from Settings 3.2.1 No issues Tested without issues Installed CAN Bus 3.2.2-beta from Settings 3.2.1 No issues Installed parameters recommanded for PICAN-M NMEA2000 board installation: sudo nano /boot/config.txt dtparam=i2c_arm=on dtparam=spi=on dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25 dtoverlay=spi-bcm2835-overlay sudo /sbin/ip link set can0 up type can bitrate 250000 sudo nano /etc/network/interfaces auto can0 iface can0 inet manual pre-up /sbin/ip link set can0 type can bitrate 250000 up /sbin/ifconfig can0 up down /sbin/ifconfig can0 down Rebooted and had following errors: 1. Failed to load dtoverlay=spi-bcm2835-overlay Changed this to comment line in config.txt file IS-IT NORMAL? 2. During Check System: during checking CAN devices... There is no Signal K connection for interface: can0 I did the MCP2515 device connection to Signal-K System check completed successfully CAN Bus now working without issues and check device traffic working fine Started Signal-K 1.42.0 can0 correctly identified with Status "Connected" without error Total server Signal K throughput (deltas/second) 3.0 Connection activity (deltas/second) defaults 0 (0%) can0 3 (100%) No issues Installed OpenCPN installer 3.1.1-beta from Settings 3.2.1 No issues Executed OpenCPN Installer 3.1.1 Executed Check Versions Debian/Ubuntu PPA candidate: 5.6.2.2~ubuntu20.04.1 500 Flatpak candidate: 5.6.2+b75be76 - stable Installation of Debian/Ubuntu PPA No issues Started OpenCPN Made initial parameters setup Installed GSHHG basemaps Created network connection for Signal-K protocol for localhost on port 3000 No issues Executed system check without errors or warnings GPS working correctly on OpenCPN confirming CAN correct captures Suspected issue: Options / Plugins / Plugins catalog update: only 4 plugins visible Want to access o-charts plugin to download my maps. Not available Extended list of plugins not available IS-IT NORMAL? I will continue my tests tomorrow after your feedback. Happy to collaborate to this great work. Raoul |