start4.elf not compatible - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: start4.elf not compatible (/showthread.php?tid=4027) |
start4.elf not compatible - ojessie - 2022-05-05 Hi, after my experience with Bulleseye and OP V 3.x I decided to use Buster and OP V 2.x with my Raspberry PI 4. Unfortunately I'm getting into a boot loop at the beginning of the installation. Basically there a "two" error messages: - start4.elf is not compatible - your board requires a newer software anyone knows how to fix this? Thanks RE: start4.elf not compatible - TVR - 2022-05-05 It's a known issue - as far as I'm aware it's fixed in OP3 but not OP2: https://forum.openmarine.net/showthread.php?tid=3881&highlight=start4.elf RE: start4.elf not compatible - ojessie - 2022-05-05 Thanks, I "fixed" it by flashing the original Buster image from Raspberry. |