Dry-test NMEA2000 with Signal K delta simulator? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Dry-test NMEA2000 with Signal K delta simulator? (/showthread.php?tid=4485) |
Dry-test NMEA2000 with Signal K delta simulator? - Copprhead - 2023-02-19 Hello all, I would like to test my Raspi/OP setup with NMEA2000 at home since my boat is too far away. Here I don't have an NMEA2000 network or real devices, so I thought I'd do the following:
Unfortunately it looks like Signal K is not forwarding any data from the simulator to NMEA2000, candump shows no messages. What I did exactly:
Interestingly, when I restart Signal K Server, it sends some messages on can0, but they are not repeated (maybe static vessel data?). This makes me think that the interface is working. But I'm wondering why the simulated data is not sent on NMEA2000. Cheers Dennis RE: Dry-test NMEA2000 with Signal K delta simulator? - Sailoog - 2023-02-19 I remember having similar issues with the simulator. Do you have a USB GPS? RE: Dry-test NMEA2000 with Signal K delta simulator? - Copprhead - 2023-02-19 No, no USB GPS. Plenty of GPS on the boat but none here and too greedy to spend money on it RE: Dry-test NMEA2000 with Signal K delta simulator? - tkurki - 2023-02-20 Enable Debug Log for Signal K to NMEA 2000 to see what the plugin is outputting. Once you know that part is working you can move on to testing the hw connection. On startup SK Can NMEA 2000 integration does the address claim and queries the bus for information about devices there. |