+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: [SOLVED] I broke node red :( (/showthread.php?tid=675)
[SOLVED] I broke node red :( - JD1 - 2017-08-09
I do not know what I managed to do but I have been unable to fix it ....
Node red dashboard or the flow screen no longer connects (no longer displays), the pi runs at between 30 and 40 % cpu load, I can get to the pi via vnc, I can run open plotter, everything seems to run except node red is somehow messed up. The problem happened under 0.14.1 but I have since upgraded to 0.14.4 and the problem persists.
The high cpu load comes from node red according to the task manager.
Is it possible that deploying 'stuff' can break node red ? I had an inactive flow page that I use to collect flows of interest and the problems seemed to start when I made that page active and deployed it.
Re-booting doesn't change anything.
RE: I broke node red :( - JD1 - 2017-08-10
I have managed to recover from my screwup. It was a mistake to mark my inactive flow page as active.
RE: I broke node red :( - Sailoog - 2017-08-10
Marking as SOLVED, we need to clean the bug forum to go to beta
