2024-07-24, 04:50 PM
Hi,
I tried this module, and it works, but only when connected to 3.3V power pin on Raspberry, despite the onboard voltage regulator. When connected to 5V, only bus 0 works.
I wanted to share my experience, if someone else has this problem.
Jani
I tried this module, and it works, but only when connected to 3.3V power pin on Raspberry, despite the onboard voltage regulator. When connected to 5V, only bus 0 works.
I wanted to share my experience, if someone else has this problem.
Jani