2021-02-24, 05:32 AM
Thanks Sailoog, you are indeed the best! Sorry for my late reply here. Updates on this thread stopped showing up in y email, so didn't realize the recent back and forth.
I changed line 375 from type_name to type.name and it works, that is the GPIO app opens. I can see the 3 temp sensors and I have edited the Signal K key successfully.
However, as per @Jamos, I can't see the sentences or the data in Signal K. I took a few screenshots for info
https://imgur.com/DxK8t1b
https://imgur.com/uXT1RLz
and interesting at reboot at Check System, the "pigpiod not running" is still appearing. I have no idea what that means.
I tried to see if I could load the sentences via the Kip dashboard and they also do not show up there.
Thanks
I changed line 375 from type_name to type.name and it works, that is the GPIO app opens. I can see the 3 temp sensors and I have edited the Signal K key successfully.
However, as per @Jamos, I can't see the sentences or the data in Signal K. I took a few screenshots for info
https://imgur.com/DxK8t1b
https://imgur.com/uXT1RLz
and interesting at reboot at Check System, the "pigpiod not running" is still appearing. I have no idea what that means.
I tried to see if I could load the sentences via the Kip dashboard and they also do not show up there.
Thanks