2022-09-27, 12:47 PM
It seems that influxdb, kapacitor and chornograf do not get installed. Do you have the right sources? copy here the content of the file /etc/apt/sources.list.d/openplotter.list
influxdb and grafana are not running
|
2022-09-27, 12:47 PM
It seems that influxdb, kapacitor and chornograf do not get installed. Do you have the right sources? copy here the content of the file /etc/apt/sources.list.d/openplotter.list
2022-09-27, 01:09 PM
deb http://ppa.launchpad.net/opencpn/opencpn/ubuntu/ bionic main
deb https://www.free-x.de/deb4op buster main deb http://ppa.launchpad.net/openplotter/openplotter/ubuntu bionic main deb https://repos.influxdata.com/debian buster stable deb https://packages.grafana.com/oss/deb stable main deb https://deb.nodesource.com/node_10.x buster main deb-src https://deb.nodesource.com/node_10.x buster main
2022-09-27, 06:09 PM
sailoog,
Thanks, but i tried a different route. I found the website seabits.com and follow the instructions to install influxdb: Code: wget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add - Code: sudo apt-get update && sudo apt-get install influxdb Code: sudo service influxdb start etc etc etc I see that the influxdb on the dashboard off openplotter is installed and running. Grafana was already installed and running so that was ok. I managed to create a dbase and saw that signalK was writing to dbase. I cant start kapacitor and chronograf, but i dont know if thats important. tomorrow more time to try to get grafana running. keep you posted. renze
2022-09-28, 08:36 AM
update:
I tried to run grafana but grafana did not "read" the dbase off infuxdb. So i tried to install chronograf directly as well as kapacitor. Chronograf i did succeed with sudo get-apt install chronograf but kapacitor the raspberry still did not find even after sudo apt-get update and upgrade. I dont untherstand. Grafana still getting the message that the URL was bad. The last effort i tried was to type the URL directly in Grafana (still the same adress) http://localhost:8086 but after the typing the adres directly it was working. Problem solved (i hope) So i am getting in dashboard of openplotter in processes tab influxdb active/running chronograf active/running and grafana-server active/running Kapacitor is still dead but i dont know if thats a problem.
2022-09-28, 11:05 AM
Thanks for the report. I do not understand what is going on in your system. Other users with similar issues fixed it just reinstalling from openplotter-dashboard.
Influxdb 1, chronograpf and kapacitor has been discontinued and replaced and unified in Influxdb 2. We have implemented everything in OpenPlotter 3 but Influxdb 2 is only for 64bit. Have you considered to update your system? Examples in OpenPlotter 3: https://openplotter.readthedocs.io/en/3....luxdb.html
2022-10-01, 10:02 AM
sailoog
thanks for reply. YES and no for updating my system. After a long time iam getting a little bit hold on working with the rapsberry pi. Iam running openplotter on a SSD and that too take a long time to get it working (problebly my newby experience with raspberry pi). So iam afraid to do it all over again. Little bugs are still showing for example i still dont get my BME280 or the HTU21D on signal k but i can see them on i2c. In stead i put a BMP280 (without humity) and that's running fine also in signal K. It is stable for now and i can import Grafana into KIP dasboard. So i think i will have it running for the time being. My total system is: Raspberry pi 4 8gb with SSD running on openplotter Pican-m (to nmea 2k and nmea 0183) RTL-SDR with miniwhip and fldigi and GQrx 16 inch touchscreen Aoc victron shunt with USBcable BMP280 and MPU 9250 (pypilot) 1-wire with serveral DB temp sensors Still working on getting my old Yanmar 2GM20 by or arduino or ESP32 to rapsberry pi.( temp oilpressure RPM, etc) Thansk a lot for the great work!!! renze
2022-10-01, 11:58 AM
(2022-10-01, 10:02 AM)schrammie Wrote: sailoog easy to just use a spare SD card & try a fresh install with ssd disconnected. Might be a good idea to track down whatever is wrong now rather than later.. |
« Next Oldest | Next Newest »
|