Posts: 17
Threads: 2
Joined: May 2021
Reputation:
1
(2024-01-15, 02:03 PM)Boatingbaileys Wrote: Some things work a little differently in the new OS, Network isn't there yet i dont think. If you keep checking post 1 and then update your settings app by clicking update candidates, the software/apps will appear. If its something major and it can't be updated then its likely to be another post with instructions or an updated image.
Hi Mat,
I've also been playing with Wi-Fi networking on a Pi5 with the Headless image from the first post of this thread. I appreciate that Network Manager is native to Bookworm, I can't seem to replicate the functionality of my Pi4 Bullseye pre-Network Manager. I have two basic challenges to overcome.
1. Getting more than 1 ESP32 wireless sensor to connect to the Pi5 running in AP mode. I can get one of three to connect, any one of three but no more.
2. I can't seem to find any direction on how to get both AP and Client working together with Bullseye Network Manager. This was a little problematic with the Pi4 but updating the Pi4 WiFi firmware cured that.
By having AP and Client working together allows an offline Pi while sailing without a separate router while also allowing internet access while on shore power/marina WiFI. No then end of the world but annoying that my previous config won't work with the Pi5.
I wonder if you've made any progress on Networking.
Mike D
Posts: 176
Threads: 14
Joined: Nov 2020
Reputation:
17
2024-01-21, 03:50 PM
(This post was last modified: 2024-01-21, 04:14 PM by Boatingbaileys.)
(2024-01-20, 12:14 AM)SVKitten Wrote: (2024-01-15, 02:03 PM)Boatingbaileys Wrote: Some things work a little differently in the new OS, Network isn't there yet i dont think. If you keep checking post 1 and then update your settings app by clicking update candidates, the software/apps will appear. If its something major and it can't be updated then its likely to be another post with instructions or an updated image.
Hi Mat,
I've also been playing with Wi-Fi networking on a Pi5 with the Headless image from the first post of this thread. I appreciate that Network Manager is native to Bookworm, I can't seem to replicate the functionality of my Pi4 Bullseye pre-Network Manager. I have two basic challenges to overcome.
1. Getting more than 1 ESP32 wireless sensor to connect to the Pi5 running in AP mode. I can get one of three to connect, any one of three but no more.
2. I can't seem to find any direction on how to get both AP and Client working together with Bullseye Network Manager. This was a little problematic with the Pi4 but updating the Pi4 WiFi firmware cured that.
By having AP and Client working together allows an offline Pi while sailing without a separate router while also allowing internet access while on shore power/marina WiFI. No then end of the world but annoying that my previous config won't work with the Pi5.
I wonder if you've made any progress on Networking.
Mike D
Hi,
I am also struggling this with. I can't get it to work as it did before (AP & Client) on a single Wifi adaptor. I can create a hotspot and share my internet but only with the hotspot open, as soon as I put any security on it, I then can't join it.
On the hotspot, have you specified a network range? I had to switch to Ad-Hoc to get that setting and then i was able to specify a network range once I went back to Hotspot.
I dont think this is an OP issue, but I'm interested to see how others have got this working. I'll do some Googling also.
Thanks,
Mat
Seems it will now stay up and allow connections with WPA/WPA2/WPA3 but not WPA3 only... Still having to use two cards to do what we could on 1.
Posts: 1
Threads: 0
Joined: Jan 2024
Reputation:
0
2024-01-21, 04:22 PM
(This post was last modified: 2024-01-22, 05:33 PM by Sailoog.)
Administrator edition: Please post this again, it was unreadable.
Posts: 8
Threads: 1
Joined: Aug 2023
Reputation:
0
(2024-01-02, 03:51 PM)Sailoog Wrote: (2024-01-02, 03:28 PM)kristoe Wrote: (2024-01-02, 12:58 PM)Sailoog Wrote: (2024-01-02, 12:52 PM)kristoe Wrote: Hi
will the touchscreen edition allow for 2 finger zoom and long press for right click?
K
long press for right click OK
2 finger zoom, install opencpn from flatpak instead debian backports
Isnt that abit odd to have to do that?
OpenCPN can not be pre-installed in the image from flatpak, you need to install it when the system is up and running. OpenCPN from debian backports can be pre-installed in the image without problem.
I did the flatpak installation. does not work there either.
Kristoffer
Posts: 17
Threads: 2
Joined: May 2021
Reputation:
1
(2024-01-21, 03:50 PM)Boatingbaileys Wrote: (2024-01-20, 12:14 AM)SVKitten Wrote: (2024-01-15, 02:03 PM)Boatingbaileys Wrote: Some things work a little differently in the new OS, Network isn't there yet i dont think. If you keep checking post 1 and then update your settings app by clicking update candidates, the software/apps will appear. If its something major and it can't be updated then its likely to be another post with instructions or an updated image.
Hi Mat,
I've also been playing with Wi-Fi networking on a Pi5 with the Headless image from the first post of this thread. I appreciate that Network Manager is native to Bookworm, I can't seem to replicate the functionality of my Pi4 Bullseye pre-Network Manager. I have two basic challenges to overcome.
1. Getting more than 1 ESP32 wireless sensor to connect to the Pi5 running in AP mode. I can get one of three to connect, any one of three but no more.
2. I can't seem to find any direction on how to get both AP and Client working together with Bullseye Network Manager. This was a little problematic with the Pi4 but updating the Pi4 WiFi firmware cured that.
By having AP and Client working together allows an offline Pi while sailing without a separate router while also allowing internet access while on shore power/marina WiFI. No then end of the world but annoying that my previous config won't work with the Pi5.
I wonder if you've made any progress on Networking.
Mike D
Hi,
I am also struggling this with. I can't get it to work as it did before (AP & Client) on a single Wifi adaptor. I can create a hotspot and share my internet but only with the hotspot open, as soon as I put any security on it, I then can't join it.
On the hotspot, have you specified a network range? I had to switch to Ad-Hoc to get that setting and then i was able to specify a network range once I went back to Hotspot.
I dont think this is an OP issue, but I'm interested to see how others have got this working. I'll do some Googling also.
Thanks,
Mat
Seems it will now stay up and allow connections with WPA/WPA2/WPA3 but not WPA3 only... Still having to use two cards to do what we could on 1.
An update to Pi5 WiFi firmware has cured the multi-ESP32 connection problem. Now to figure out how to have AP and Client at the same time. Can't seem to find out how to create a virtual WLAN adaptor with Network Manager. I recall the Pi4 OpenPlotter Network utility did this pre-NM (WLAN9) rings a bell. I'll need to go back and check.
M
Posts: 220
Threads: 28
Joined: Jul 2020
Reputation:
10
In Pi5 Bookworm you just need to left-click on the connection icon > Advanced options > Create Wireless Hotspot. Or if you already have one, Edit connections.
There you can setup the hotspot on wlan0 and share the connection with other networks.
Posts: 176
Threads: 14
Joined: Nov 2020
Reputation:
17
Hi - Just run through how you share the connection, because I can only do this now with two cards?
Posts: 220
Threads: 28
Joined: Jul 2020
Reputation:
10
I'm sorry I think it just seemed easy to me because i was connected with the ethernet cable to my house router.
If I connect to the wifi, the hotstop doesn't work.
Posts: 176
Threads: 14
Joined: Nov 2020
Reputation:
17
Not a problem - I think something strange is going on but I'm not sure its OP related. I think this is in the OS code.
Posts: 176
Threads: 14
Joined: Nov 2020
Reputation:
17
2024-01-22, 08:31 PM
(This post was last modified: 2024-01-22, 08:31 PM by Boatingbaileys.)
(2024-01-22, 03:57 PM)MigGat Wrote: In Pi5 Bookworm you just need to left-click on the connection icon > Advanced options > Create Wireless Hotspot. Or if you already have one, Edit connections.
There you can setup the hotspot on wlan0 and share the connection with other networks.
(2024-01-22, 05:53 PM)Boatingbaileys Wrote: Not a problem - I think something strange is going on but I'm not sure its OP related. I think this is in the OS code.
Ok - I've got this working, but on a reboot, the virtual interface disappears and I have to recreate it, so I need to work out how to stop that happening.
Here is what I did:
sudo iw phy0 interface add vap0 type __ap
Then in the network manager, you can see the virtual AP, called vap0. I then set that up as a hotspot, had to force 2.4 GHz, select vap0 in device, create the SSID. I'm using WPA/WAP2/WAP3 as the security type otherwise I can't join it. IPv4 settings - Method Shared to other computers and i've created an IP address range 10.1.1. 24 10.1.1.1 in my case. Then I joined my home network (remember this has to be the same band as the hosted network) so 2.4 in my case, bounced things a couple of times and its working. My phone joined it and I have internet access through the pi.
ifconfig shows ips on both vap0 and wlan0 in the correct networks.
Any chance you can bring the app back
|