2024-06-15, 05:15 PM
I was happily running OP4 on a RP5 w/MacA hat. When I can to the boat today and logged into my openplotter I noticed that there was a Signal K update. I click on update and after a while everything stopped working. I rebooted the system and now Signal K does not start:
Here is the Checking OP output:
Checking display server... | x11
Checking virtual keyboard... | keyboard-EN.xml
Checking OpenPlotter autostart... | enabled
Checking OpenPlotter packages source... | added
Checking MAIANA transponder... | NMEA 0183 over TCP (10110) interface OK | service not running
↳There is no MAIANA device defined
Signal K connection "maianaCommand" does not exists. Reinstall "MAIANA AIS transponder" app.
Error validating Signal K connection: [Errno 111] Connection refused.
Checking GPIO... | 1W disabled | pulses disabled | digital disabled | service not running
↳Error validating Signal K connection: [Errno 111] Connection refused.
Checking I2C sensors... | I2C disabled | service not running
↳Error validating Signal K connection: [Errno 111] Connection refused.
Checking Notifications... | service running
↳Error validating Signal K connection: [Errno 111] Connection refused.
Checking CAN devices...
↳There is no Signal K connection for interface: can0
Checking serial connections alias... | All your serial connections have an assigned alias
Checking OpenCPN... | not running | autostart disabled
Checking Signal K server...
↳Signal K server is not running
Checking serial connections conflicts... | no conflicts
Checking network connections conflicts... | no conflicts
Checking GPIO conflicts... | no conflicts
Checking Power off management... | enabled
Checking Shutdown management...
↳service not running
Checking touchscreen optimization... | disabled
Checking rescue mode... | disabled
Checking debugging mode... | disabled
Checking WiFi password... | done
CHECK SYSTEM FINISHED
I tried to reinstall Signal K but still not joy.
Any help to be greatly appreciated
Here is the Checking OP output:
Checking display server... | x11
Checking virtual keyboard... | keyboard-EN.xml
Checking OpenPlotter autostart... | enabled
Checking OpenPlotter packages source... | added
Checking MAIANA transponder... | NMEA 0183 over TCP (10110) interface OK | service not running
↳There is no MAIANA device defined
Signal K connection "maianaCommand" does not exists. Reinstall "MAIANA AIS transponder" app.
Error validating Signal K connection: [Errno 111] Connection refused.
Checking GPIO... | 1W disabled | pulses disabled | digital disabled | service not running
↳Error validating Signal K connection: [Errno 111] Connection refused.
Checking I2C sensors... | I2C disabled | service not running
↳Error validating Signal K connection: [Errno 111] Connection refused.
Checking Notifications... | service running
↳Error validating Signal K connection: [Errno 111] Connection refused.
Checking CAN devices...
↳There is no Signal K connection for interface: can0
Checking serial connections alias... | All your serial connections have an assigned alias
Checking OpenCPN... | not running | autostart disabled
Checking Signal K server...
↳Signal K server is not running
Checking serial connections conflicts... | no conflicts
Checking network connections conflicts... | no conflicts
Checking GPIO conflicts... | no conflicts
Checking Power off management... | enabled
Checking Shutdown management...
↳service not running
Checking touchscreen optimization... | disabled
Checking rescue mode... | disabled
Checking debugging mode... | disabled
Checking WiFi password... | done
CHECK SYSTEM FINISHED
I tried to reinstall Signal K but still not joy.
Any help to be greatly appreciated