2020-07-09, 09:55 AM
(2020-07-08, 08:54 PM)tkurki Wrote: Sorry, my mistake, forgot that you had nmea0183-to-nmea0183 included.
So, your setup is correct and should be working - now we need to figure out why it isn't.
It would be helpful if you could share your settings, located at /home/pi/.signalk/settings.json and /home/pi/.signalk/plugin-config-data/nmea0183-to-nmea0183.json. Earlier I asked about invisible characters like spaces in the event names - these would not show in the screen captures, but would show up in the settings files.
Do you really need nmea0183-to-nmea0183? You could try the value OPENCPNOUT in APREPEAT connection's Output events field. This would forward all data from OPENCPNOUT to APREPEAT.
(2020-07-06, 10:35 PM)sparticle Wrote: My connection OPENCPNOUT is not emitting anything as far as I am aware.
The events are internal to the server, so you would not be aware of them being emitted - same thing as you are referring to with "datastream" and "outputting events".
(2020-07-06, 10:35 PM)sparticle Wrote: My naming convention works for me and is perfectly logical.
I understand it works for you, I was trying to point out that the naming is a bit ambiguous and may not be clear to others.
Thank you I will be going to the boat in the next few days and will forward those files. I will try and can the nmea0183 to nmea0183 app. and try and direct OPENCONOUT in APREPEAT. I believe I did try this. But will go around this again.
Thank you for your support.
Cheers
Spart