2024-01-13, 10:33 PM
Hi,
I am trying to install MAIANA AIS in openplotter but I keep getting errors and no AIS received data. I am running on a RaspPi4 with the latest OpenPlotter install w/ Signal-K 2.5.0 & MAIANA AIS 3.1.6-stable.
Following instructions, I've configured the serial device using "openplotter-serial" and made the signal-k connection (38,400). All looks fine until I get to openplotter-maiana. When I try to "Refresh" I get an "Unexpected error validating connection: Expected object or value. Try 'Reconnect'." After "Approving" the connection (NEVER w/ read/write) and "Refreshing", I get messages "Cannot connect with device, try again" but now I see "maiana" in the pull down listbox. And repeated "Refresh" and "reconnects" just repeats the "Unexpected error ..." messages.
I did prior configure the MAIANA AIS station via the breakout board using a serial terminal. I was able to see the MAIANA NMEA data in the terminal and another vessel has confirmed that I am transmitting correct AIS data. I am not receiving any AIS data. Looking at the Signal-K data browser I do get data for maiana.GP & maiana.GN GPS data, but this GPS data does not get routed to an OpenCPN Signal-K connection nor do I see any AIS data. I tried removing and reinstalling maiana in openplotter with no joy.
I kindly ask for any help or insights. Thanks.
I get this from the OpenPlotter "Check System"::
Checking MAIANA transponder... | MAIANA device: /dev/ttyOP_maiana | device settings OK
↳check device settings
check device settings
Unexpected error validating connection: Expected object or value.
running
I am trying to install MAIANA AIS in openplotter but I keep getting errors and no AIS received data. I am running on a RaspPi4 with the latest OpenPlotter install w/ Signal-K 2.5.0 & MAIANA AIS 3.1.6-stable.
Following instructions, I've configured the serial device using "openplotter-serial" and made the signal-k connection (38,400). All looks fine until I get to openplotter-maiana. When I try to "Refresh" I get an "Unexpected error validating connection: Expected object or value. Try 'Reconnect'." After "Approving" the connection (NEVER w/ read/write) and "Refreshing", I get messages "Cannot connect with device, try again" but now I see "maiana" in the pull down listbox. And repeated "Refresh" and "reconnects" just repeats the "Unexpected error ..." messages.
I did prior configure the MAIANA AIS station via the breakout board using a serial terminal. I was able to see the MAIANA NMEA data in the terminal and another vessel has confirmed that I am transmitting correct AIS data. I am not receiving any AIS data. Looking at the Signal-K data browser I do get data for maiana.GP & maiana.GN GPS data, but this GPS data does not get routed to an OpenCPN Signal-K connection nor do I see any AIS data. I tried removing and reinstalling maiana in openplotter with no joy.
I kindly ask for any help or insights. Thanks.
I get this from the OpenPlotter "Check System"::
Checking MAIANA transponder... | MAIANA device: /dev/ttyOP_maiana | device settings OK
↳check device settings
check device settings
Unexpected error validating connection: Expected object or value.
running