2024-02-21, 10:11 PM
S***ugar, The magic smoke poured out of the McArthur board near the LEDs and now the CAN bus is dead.
The power module was very hot before I quickly powered it down, removed the power module, and restarted with power directly from the Pi. I found that the CAN bus wouldn't connect. Removing it from the CAN controller and adding it back didn't help.
Running a Pi5 with NVMe SSD headless so not overloaded.
I guess I'll be waiting until summer for another attempt.
Good luck out there and keep your nostrils tuned for that distinctive smell.
The power module was very hot before I quickly powered it down, removed the power module, and restarted with power directly from the Pi. I found that the CAN bus wouldn't connect. Removing it from the CAN controller and adding it back didn't help.
Running a Pi5 with NVMe SSD headless so not overloaded.
I guess I'll be waiting until summer for another attempt.
Good luck out there and keep your nostrils tuned for that distinctive smell.