2024-04-29, 11:17 PM
Im trying to send the following information in nmea 183 format:
- GPS position from Signal K to VHF
- AutoPilot information from OpenCPN to Raymarine ST2000+
I have used the following setup:
Signal K Conection Type NMEA0183, ID nmeaout, Source Serial, Port /dev/ttyOP_nmeaout, Baudrate 4800, Using NMEA0183 to NMEA0183* emiting GGA - Global Positioning System Fix Data
OpenCPN Conection: Type Serial, Direction IN/OUT, Protocol NMEA0183, Port /dev/ttyOP_nmeaout, Baudrate 4800, Transmiting RMB,APB,XTE
When checking for conflicts I get:
Checking serial connections conflicts...
↳There are conflicts between the following serial connections:
OpenCPN -> connection ID: 3 | device: /dev/ttyOP_nmeaout
Signal K -> connection ID: nmeaout | device: /dev/ttyOP_nmeaout
What's wrong with my setup? Should I only transmit from either OpenCPN or Signalk? Not sure if APB is available in Signal K
Can anyone give me some guidance?
- GPS position from Signal K to VHF
- AutoPilot information from OpenCPN to Raymarine ST2000+
I have used the following setup:
Signal K Conection Type NMEA0183, ID nmeaout, Source Serial, Port /dev/ttyOP_nmeaout, Baudrate 4800, Using NMEA0183 to NMEA0183* emiting GGA - Global Positioning System Fix Data
OpenCPN Conection: Type Serial, Direction IN/OUT, Protocol NMEA0183, Port /dev/ttyOP_nmeaout, Baudrate 4800, Transmiting RMB,APB,XTE
When checking for conflicts I get:
Checking serial connections conflicts...
↳There are conflicts between the following serial connections:
OpenCPN -> connection ID: 3 | device: /dev/ttyOP_nmeaout
Signal K -> connection ID: nmeaout | device: /dev/ttyOP_nmeaout
What's wrong with my setup? Should I only transmit from either OpenCPN or Signalk? Not sure if APB is available in Signal K
Can anyone give me some guidance?