OpenPlotter 4 roadmap

[jdelara]

HI!

I just bought a Pi5 8GB, installed it the OP4 Beta Starting and I could manage to have GPS from USB Gps. All fine
Now I have tried to use the Moitessier hat2, which I have running every day in my PI4 but  it doesn't work connected to PI5: it doesn't light the lights and in Signal K says there's no incoming activity.

Just as a reminder; I do all the steps in the docs for hacking the moitessier hat:

• In serial settings,  I activate the UART0, get the message that I  will lose BT connection ( BUt I still have it, maybe this is aclue) I restart  PI and then, I get 2 connected devices: TTYAMA0 and TTYAMA10. (but nothing else is connected at the time) (??)
  
• In the serial devices tab, I create an alias  for  TTYAMA0, as  nmea0183 data, 
  
• Then apply, 
  
• then in Connections tab, I make a connection of that device to Signal K with the right bauds 921600,  
  
• Signal K restarts and in the SK dashboard I can see that the connection has been created, wih no activity and  and connection and plugin status  is green and connected
  
• All correct as per instructions, I already did it for OP3 in my PI4!
  

The problem is that in the PI5, there is no activity at all and no lights in the pcb of the hat ( in PI4 the lights are on as soon as the PI starts). I installed it back to the PI4 and it is working as usual, si the HAT is fine.

What am I missing?

Has anybody used the Moitessier HAt in the PI5? Or should I leave it for impossible for now until OP4 is released?

Thanks!!!

Did you find how to solve this problem?
Look, my "hacked-Moitessier" 2 hat doesn't work neither on rpi4 or rpi5 with Openplotter-4. The latest version is OP-4.1.15
What is the OP version you are using in your working rpi4?
Besides,  please share info with me if you make any progress with rpi5.
Thx!

I have get it working   ,  You should use a unhack   Header  .   see my  post  "Moitessier HAT on RPI5 unHacked"

 Hi winkaj,
 Could you please explain me how to get the Moitessier-2 working on RPI-5?
 My skills are limited...  
 Your post =>
---------------------------------------------------------------------------------------------------------------------------
Hi  All
For getting  the GPS  (maybe the Ais )  to work  at a RPI 5  / OP4  
i have to unHack the Header .  

Set up 
Moitessier HAT (version 1)  
Macarthur HAT
RPI 5  (gb)
NV  SSD   

Havent testet AIS   because  Small Antenna , 4 Km to the sea  , 
------------------------------------------------------------------------------------------------------------------------------
 Unfortunately, the above post makes me feel like a real ignorant ...
 Where can I get more info about "unHack the Header"?
 Thanks in advance,