(2019-07-10, 05:34 PM)Sailoog Wrote:Hello,(2019-07-09, 10:44 AM)Luckbert Wrote:(2019-07-05, 01:22 PM)Sailoog Wrote:(2019-07-05, 12:58 PM)jim321 Wrote: has this been implemented yet.
https://github.com/sailoog/openplotter/i...-421732046
i saw the Latest commit was fix sdr
Yes it was done some time ago. In OpenPlotter 2 is possible to get data from both AIS channels simultaneously using only one device. But at this moment only in Raspberry 3.
The commit you are referring to is the fix for gqrx for buster (SDR Radio reception)
Hello, Saillog,
I have already worked with AISDeco2 (http://xdeco.org/?page_id=30#ai2_id=30#ai2) in the last OP versions. It always worked very well and can also receive signals on 2 channels.
I just tested the program with a RPI3+ and Buster.
It seems to work. I just had to install the required packages and then it worked.
Unfortunately I am not able to test it with real ships at the moment.
Is this an option?
Greetings Jürgen
It could be an option but we use https://github.com/sailoog/rtl-ais and aisdecoder and it is already working really well.
Then it's all right.
I thought there were problems with the AIS reception on two channels.
I must have read it wrong.
Greetings Jürgen
(2019-07-10, 08:04 PM)MatsA Wrote:(2019-07-10, 05:34 PM)Sailoog Wrote:(2019-07-09, 10:44 AM)Luckbert Wrote:(2019-07-05, 01:22 PM)Sailoog Wrote:(2019-07-05, 12:58 PM)jim321 Wrote: has this been implemented yet.
https://github.com/sailoog/openplotter/i...-421732046
i saw the Latest commit was fix sdr
Yes it was done some time ago. In OpenPlotter 2 is possible to get data from both AIS channels simultaneously using only one device. But at this moment only in Raspberry 3.
The commit you are referring to is the fix for gqrx for buster (SDR Radio reception)
Hello, Saillog,
I have already worked with AISDeco2 (http://xdeco.org/?page_id=30#ai2_id=30#ai2) in the last OP versions. It always worked very well and can also receive signals on 2 channels.
I just tested the program with a RPI3+ and Buster.
It seems to work. I just had to install the required packages and then it worked.
Unfortunately I am not able to test it with real ships at the moment.
Is this an option?
Greetings Jürgen
It could be an option but we use https://github.com/sailoog/rtl-ais and aisdecoder and it is already working really well.
Checked aisdeco2 and it doesn't work on RPi 4, and is not open source !! Error "rtlsdr_read_reg failed with -7".
Hi,
I'm sorry,
I could only test it with an RPI 3+ with Buster.
Greetings Jürgen
Entschuldigung für mein Englisch. Es ist "deepl.com english"
PN bitte auf german.
PN bitte auf german.