yes, I tried it once, not very impressed
also, another problem is the "Output Events" and "Sentence Event" fields, which are always overwritten.
I have a nmea0183 connection for charplotter, named garmin. For this connection, I set the "Sentence Event" field as "garmindata".
Similar for autopilot, "Sentence Events" is set to "pilotdata", for AIS connection is "aisdata" and so on.
In garmin's connection, as "Output Events", I tried to set "pilotdata" (or "pilotdata, aisdata", to have data from autopilot and from ais)
In pilot's connection, as "Output Events", I tried to write "garmindata", because garmin's data should arrive in autopilot.
But when i set "garmindata" into pilot's connections, the garmin's "Output Events" field is overwritten with "garmindata" instead the initially entered "pilotdata".
The "hardware" is a Pi4/8Mb, Kingston SSD on USB3.0 port, running latest versions of SK and OP's apps.
Thanks for your time
also, another problem is the "Output Events" and "Sentence Event" fields, which are always overwritten.
I have a nmea0183 connection for charplotter, named garmin. For this connection, I set the "Sentence Event" field as "garmindata".
Similar for autopilot, "Sentence Events" is set to "pilotdata", for AIS connection is "aisdata" and so on.
In garmin's connection, as "Output Events", I tried to set "pilotdata" (or "pilotdata, aisdata", to have data from autopilot and from ais)
In pilot's connection, as "Output Events", I tried to write "garmindata", because garmin's data should arrive in autopilot.
But when i set "garmindata" into pilot's connections, the garmin's "Output Events" field is overwritten with "garmindata" instead the initially entered "pilotdata".
The "hardware" is a Pi4/8Mb, Kingston SSD on USB3.0 port, running latest versions of SK and OP's apps.
Thanks for your time
███ - SV Haimana