2020-07-06, 08:50 PM
Still don't know why it didn't work. I disconnected everything, removed all serial and signalk connections, rebooted, connected and set it all up again in and then I got AIS and GPS-data in OpenCPN!
Now it's just NMEA-out to the autopilot that doesn't work. It's all set up as in the manual (NMEA multiplexing) but no data transmitted. I think something is wrong in OpenCPN, NMEA-logging says inbound data is filtered and outbound data is removed.
Data from AIS/GPS is 4800 baud as it is also sent to the VHF and it does not support higher speed. Another thing to fix when everything else is up and running...
Now it's just NMEA-out to the autopilot that doesn't work. It's all set up as in the manual (NMEA multiplexing) but no data transmitted. I think something is wrong in OpenCPN, NMEA-logging says inbound data is filtered and outbound data is removed.
Data from AIS/GPS is 4800 baud as it is also sent to the VHF and it does not support higher speed. Another thing to fix when everything else is up and running...