Tank Adapter YDTA-01N to SK via Shipmodule Miniplex

[Sjoerd02]

Hi all,
I have connected a YDTA-01N tankadapter on my tanksensor.
The divice seems to work OK, on the SD card it's writing the correct tank content (80% ~ 88 liter)

I connected the sensor to the N2K network.
The Shipmodule miniplex 3E N2K is getting the input from the tankmodule and from the logfile I can see for example:

$MXPGN,01F211,68BB,FF0000044C4EA800*60

The miniplex send this to UPD 10120

in the SK log I find:

Aug 17 11:54:21 2021-08-17T09:54:21.871Z canboatjs:fromPgn parsed pgn {"prio":0,"pgn":127505,"dst":255,"src":391,"input":["$MXPGN,01F211,68BB,FF0000044C4EA800*60"],"fields":{"Level":0,"Capacity":282370355.6,"Reserved1":"0"},"description":"Fluid Level","timestamp":"2021-08-17T09:54:21.871Z"}

So it look like the data is recieved in SK, however not the values like 80% and/or 88Liter


Now I have some questions:
1) How is propriatarie MXPGN recognized as N2000?
2) How is the data being read from the MXPGN sentence?


Thanks in advance