Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
(2020-06-02, 08:46 AM)glowntiger Wrote: For information:
In the next app Version the MCS is able to READ! Seatalk1.
For this you can connect the yellow seatlk1 wire to one of the inputs (In1-In4) and you get the Data from the Seatalk bus!
You Sir, are amazing!
Can't wait to get this up and running. Have you already made a plugin to decode Seatalk to.. what?
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
MCS app is missing in Openplotter settings 2.3.0, it used to be there right?
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Have you install the mcs app? Its first there after you have install the app manual one time...?
Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
(2020-06-04, 02:05 PM)glowntiger Wrote: Have you install the mcs app? Its first there after you have install the app manual one time...?
Yes, i have it installed a while ago, but after reinstalling the Openplotter app yesterday it's gone.
Probably time to do a re-install
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Posts: 47
Threads: 1
Joined: Feb 2020
Reputation:
0
(2020-06-03, 01:22 PM)glowntiger Wrote: Hi niklun,
do not know you exactly system setting....
Have you enable the autoshutdown mode in the MCS APP before you have use this mode as described in the Manual?
If you have not enable this widget, the pi stops hard... !!!
Yes, I have enabled the auto shutdown option. Now I don't trust. I turn off the RPI from software, not through MCS switch. But I'd like to turn it off at the switch. Is there any way to control the shutdown dynamics through the MCS switch? This to check if the times are correct.
My system is composed of: RPI 4 - HAT Moitessier - MCS
Thanks
Comet 1000 - Openplotter under construction