(2021-03-24, 01:30 PM)verkerkbr Wrote: (2021-03-24, 12:27 PM)SkibladnerII Wrote: (2021-03-24, 10:00 AM)verkerkbr Wrote: (2021-03-23, 09:02 PM)SkibladnerII Wrote: Hey
I have today installed OpenPlotter on my RPi4 Model 4 8 GB.
i will in OpenCPN add oeSENC plugin, it gets installed and removed again, because it says OpenCPN does not fit this version.
then I have tried to update all programs in the settings menu and it has not helped
I really hope someone can help
MVH
Benjamin
Skipper on Skibladner II
Hi B,
if you use the usb Oesenc plug. Then sometimes a file is missing: try installing libusb-0.1-4. If you use 64 bits RaspiOS you need another version of the Oesenc plugin.
Bram
How to do that, I am brand new in this Rpi4 world
Installing this file in a Linux system terminal is:
sudo apt install libusb-0.1.-4.
And don't forget to switch the Oesenc plugin to on ! (Plugin menu)
What operating system do you use ?
Bram
pi@openplotter:~ $ sudo apt install libusb-0.1.-4.
Indlæser pakkelisterne... Færdig
Opbygger afhængighedstræ
Læser tilstandsoplysninger... Færdig
E: Kunne ikke lokalisere pakken libusb-0.1.-4.
E: Kunne ikke finde nogle pakker med glob »libusb-0.1.-4.«
E: Kunne ikke finde nogle pakker med regulært udtryk »libusb-0.1.-4.«
pi@openplotter:~ $ sudo apt install libusb-0.1.-4
Indlæser pakkelisterne... Færdig
Opbygger afhængighedstræ
Læser tilstandsoplysninger... Færdig
E: Kunne ikke lokalisere pakken libusb-0.1.-4
E: Kunne ikke finde nogle pakker med glob »libusb-0.1.-4«
E: Kunne ikke finde nogle pakker med regulært udtryk »libusb-0.1.-4«
pi@openplotter:~ $
does not work