Posts: 47
Threads: 11
Joined: May 2019
Reputation:
1
Hi Sailoog,
I installed the latest up to date version of Raspberry-pi OS that is Debian Bookworm. I tried downloading the starter img to. Currently I'm working with the image on a PI4. I still have warnings regarding the credentials for notifications. (However no request is sent, I do not see a request for Notifications signalK access in SignalK)
Before that i had a go with the installation of the starter img on a PI5. (I teach computer science so have a lot of different PI's handy) That installation went oké. Except for the UART's 2 and 4 not showing op in Serial after they have been enabled, and the PI had rebooted.
It is possible that I tried the V3.x.x settings deb file first. When I'm back at my desk i will certainly verify that.
i would however really prefer to use the PI5.
Koen.
Posts: 3,038
Threads: 63
Joined: Mar 2016
Reputation:
288
There are warnings everywhere in the documentation about not changing the username on preconfigured Openplotter images for obvious reasons. You omitted this script in all your threads asking for help and it is impossible to help you if you hide the most important part.
Posts: 47
Threads: 11
Joined: May 2019
Reputation:
1
Sorry, but I seem to have missed that warning everywhere maybe use capitals next to the img download link?
Posts: 47
Threads: 11
Joined: May 2019
Reputation:
1
Hi,
Just a little feedback ...
Upon my return at my desk i reinstalled the image without running the little script that changes about everything in the RPi configuration. The installation now works, at least for the features that I was able to test at my desk like a charm.
On another note ... Before I start a new thread, the powerstage on my tillerpilot "Autohelm 1000" died on me during a stormy passage. I've ordered a new pypilot motordrive unit to replace the electronics. As far as i understand i need to add two endstops on the motor, no problem there.
But I'm kind a fond of the 6 buttons on the tillerpilot (-1, -10, +1, +10, Auto and Stand-by) is there a way to keep them operational?
Thanks in advance,
Koen.